2 December 2024 in IEEE Transactions on Applied Superconductivity
In the framework of the IMCC (International Muon Collider Collaboration), a feasibility study for a collider ring 10 km long with muons having a center of mass energy of 10 TeV is currently being carried out. The superconducting magnets represent one of the most challenging components of the collider stage of such a facility: indeed, the need for high fields, large apertures and dipole + quadrupole combined function require technological choices at the edge of the status of the art. These requirements arise from the short lifetime at rest of the muons, 2.2 $\mu \text {s}$, which brings the need for a compact collider to maximize the luminosity and large bore magnets to accommodate adequate shielding for the decay products. Furthermore, long straight sections must be avoided to mitigate the dose hazard induced by the collimated neutrino beams produced by the muon decay, hence dipoles and quadrupoles must be combined in the same magnets. In this contribution we will present the preliminary 2D design of a superconducting magnet based on the block-coil concept that meets the requirements needed for the muon collider ring, focusing both on the electromagnetic and mechanical aspects.
28 November 2024 in IEEE Transactions on Applied Superconductivity
In accordance with the guidelines set forth in the Updated European Strategy for Particle Physics, the International Muon Collider Collaboration has been initiated to assess the feasibility of a Muon Collider facility with a center-of-mass energy of 10 TeV. The primary challenges stem from the brief muon lifetime at rest, which is limited to 2.2 µs. Addressing this demanding condition necessitates the incorporation of advanced technologies in magnets, RF systems, targets, shielding, and cooling. To minimize collimated neutrino beams resulting from muon decay and reduce the impact of radiation background around the facility, the straight sections in the collider ring must be minimized. Achieving this goal involves integrating beam optics quadrupoles with bending dipoles featuring a high magnetic field ($>$10 T) and gradient ($>$100 T/m) within a large aperture (140 mm). These stringent constraints require cutting-edge technologies in material selection, mechanical layout, quench protection, shielding, and cooling. This contribution explores the performance limits of potential candidate materials for such magnets, specifically LTS (Low-Temperature Superconductors) Nb$_{3}$Sn and (High-Temperature Superconductors) ReBCO, regarding the maximum field, mechanical stress, and stored energy. We present an original approach that allows us to explore the achievable phase space of parameters using both analytical expressions and the FEM software ANSYS, handled by Python code. Using this approach, we will show the obtained results for dipoles and quadrupoles.
17 December 2024 in IEEE Transactions on Applied Superconductivity
Within the framework of the International Muon Collider Collaboration (IMCC), an innovative feasibility study on a Muon Collider accelerator complex is currently under development, granted by the European Union through Agreement 101094300. The proposed goal aims to develop a 10 km collider ring accelerating muons at approximately 10 TeV in the center-of-mass frame. To achieve this target, several requirements on the collider design arise to maximize the luminosity despite the short lifetime of this type of particle at rest. Despite being operated in steady-state mode, the superconducting magnet dipoles of the main collider are presently evaluated as the most challenging technological development of the design study. High levels of magnetic field above 10 T are presently foreseen with a magnet bore diameter around 150 mm to accommodate a tungsten shielding for the muon decay heat deposition. To minimize the radiation dose, coming from the collimated neutrino beams, different types of combined dipole and quadrupole are also considered in the lattice reducing the straight sections in the collider at the expense of the magnet performances and feasibility. An analytical analysis of possible magnet performances with the available technology has been already developed suggesting different working points for the magnet design. In this contribution, a first proposal of 2D cos$\theta$ electromagnetic and mechanical designs is provided comparing the analytical approach with FEM (Finite Element Method) - optimized configurations. HTS (High Temperature Superconductor) superconducting magnet designs have been evaluated to estimate the maximum possible expected performances of the collider, minimize the magnet cost, and deal with the requirements for the cryogenic cooling of the entire accelerator complex.
19 December 2024 in IEEE Transactions on Applied Superconductivity
To further explore the physics beyond the capabilities of the LHC and its High-Luminosity Upgrade (HL-LHC), particle physicists are studying advanced accelerators in order to perform finer measurements and/or reach higher energies. Upon the recommendation of the Updated European Strategy for Particle Physics (ESPP), an International Muon Collider Collaboration has been established to investigate the feasibility of a muon collider facility with a center-of-mass energy of 10 TeV. This endeavor is confronted with several technical challenges, primarily arising from the brief muon lifetime at rest, which is only 2.2 ${\mu }$s. Addressing this stringent constraint necessitates the deployment of innovative technologies, including challengingmagnets, RF systems, targets, shielding, and cooling methodologies. This paper focuses on optimizing the electromagnetic and mechanical aspects of high-temperature superconducting (HTS) dipoles with large rectangular aperture for the accelerator ring, with a bore field up to 10 T, using finite element techniques. The objectives include ensuring a precise control over magnetic field uniformity and a preliminary evaluation of the mechanical behaviour of the HTS coils. The study is aligned with the priority set by ESPP on technological advancements, notably in high-field superconducting magnets, crucial components for any forthcoming circular collider.
13 January 2025 in IEEE Transactions on Applied Superconductivity
The International Muon Collider Collaboration (IMCC) has been formed with the aim of delivering a feasibility study on a Muon Collider facility, as recommended by the European Strategy for Particle Physics and supported by the European Union through the Grant Agreement 101094300. Such facility would allow to study frontier physics with a 10 km collider ring and a muon center of mass energy of 10 TeV. Several technical challenges arise due to the short rest lifetime of these particles (2.2 $\mu$s), necessitating the use of cutting-edge technology for all components, particularly the superconducting magnets. In this contribution, we present the main challenges of such magnets, focusing on the performance limits of the available technology and the possible design choices. The LTS (Low Temperature Superconductor) materials Nb-Ti and Nb$_{3}$Sn and the ReBCO HTS (High Temperature Superconductor) are analysed, comparing costs, mechanical structure feasibility and ease of protection from quench, taking into account also the sustainability of the cooling and the compatibility with the beam dynamics constraints. Furthermore, preliminary designs of arc dipoles in cos$\theta$ coil and block coil configurations is discussed, focusing on the maximum achievable bore field, the stress induced by the electromagnetic forces and the AC losses due to magnetization.
10 November 2025 in IEEE Transactions on Applied Superconductivity
Within the framework of the International Muon Collider Collaboration (IMCC), researchers are involved in a feasibility study to develop high-temperature superconducting (HTS) magnets for a 10 km collider ring, designed to reach a 10 TeV Center-of-Mass (CoM) energy.Due to the short lifetime of muons of only 2.2 $\mathrm{\mu }$s, the machine must minimize their acceleration time, allowing them to collide before the decay. To optimize the machine cost and maximize the collider luminosity, the superconducting dipoles of the collider ring must be compact and generate high steady-state magnetic fields. In addition, they must feature large apertures for the insertion of a shielding structure needed to preserve the superconducting coils from muon decay products. These demanding specifications pose significant technological challenges for the design of the dipole magnets, both in terms of physics and engineering. In this contribution, we give an overview of the conceptual 2D electromagnetic design of the main collider dipoles, followed by a preliminary mechanical analysis for a first estimation of stresses due to the Lorentz forces. Since the coil design is based on REBCO tapes - whose magnetization effects must be taken into account - an analytical code was written in MATLAB to evaluate the magnet performances considering non-uniform current distribution according to the Brandt model.A validation study of the code by comparing its results with finite element method (FEM) simulations is also presented. In this comparison, the computational time of the analytical and numerical approaches will also be pointed out to better appreciate the importance of the work done in developing the new tool.