14 February 2025 in Science Advances
Fermi acceleration is believed to be the primary mechanism to produce high-energy charged particles in the Universe, where charged particles gain energy successively from multiple reflections. Here, we present the direct laboratory experimental evidence of ion energization from single reflection off a supercritical collisionless shock, an essential component of Fermi acceleration, in a laser-produced magnetized plasma. A quasi-monoenergetic ion beam with two to four times the shock velocity was observed, which is consistent with the fast ion component observed in the Earth’s bow shock. Our simulations reproduced the energy gain and showed that ions were accelerated mainly by the motional electric field during reflection. The results identify shock drift acceleration as the dominant ion energization mechanism, which is consistent with satellite observation in the Earth’s bow shock. Our observations pave the way for laboratory investigations of the cosmic accelerators, also be beneficial to laser fusion and laser-driven ion accelerator.
27 March 2023 in Plasma Physics and Controlled Fusion
Plasma-based optics has emerged as an attractive alternative to traditional solid-state optics for high-power laser manipulation due to its higher damage threshold. In this work, we propose a plasma zone plate (PZP) driven by the ponderomotive force of a Laguerre–Gaussian beam when it irradiates an underdense plasma slice. We formulate the theory of the PZP and demonstrate its formation and functioning using particle-in-cell simulations. The proposed scheme may offer a new plasma-based method to manipulate high-power lasers.
1 January 2023 in Matter and Radiation at Extremes
The inverse Faraday effect (IFE), which usually refers to the phenomenon in which a quasi-static axial magnetic field is self-generated when a circularly polarized beam propagates in a plasma, has rarely been studied for lasers with unconventional polarization states. In this paper, IFE is reconsidered for weakly relativistic full Poincaré beams, which can contain all possible laser polarization states. Starting from cold electron fluid equations and the conservation of generalized vorticity, a self-consistent theoretical model combining the nonlinear azimuthal current and diamagnetic current is presented. The theoretical results show that when such a laser propagates in a plasma, an azimuthally varying quasi-static axial magnetic field can be generated, which is quite different from the circularly polarized case. These results are qualitatively and quantitatively verified by three-dimensional particle-in-cell simulations. Our work extends the theoretical understanding of the IFE and provides a new degree of freedom in the design of magnetized plasma devices.
1 August 2023 in Review of Scientific Instruments
A digital holographic interferometry based on Fresnel biprism has been developed to measure the electron density profile of laser-produced collisionless shocks in laboratory, which used the Fourier transform method to solve the wrapped phase. The discontinuous surfaces of shocks will produce the break and split of the interference fringes, which cannot be processed by the conventional path-following phase unwrapping algorithm when reconstructing the real phase of the plasma. Therefore, we used a least-squares method to extract the real phase, which is proportional to the line-integrated electron density. We obtained fine density profiles of collisionless shocks in the line-integrated density region around 1018 cm−2 with a density resolution of 3.38 × 1016 cm−2. The shock structure is in well agreement with that measured by the dark-field schlieren methods and that predicted by shock jump condition. Synthetic holograms are used to confirm the effectiveness of our algorithm, and it is shown that correct results can still be obtained even if part of the diagnostic light is refracted out of the optical system by the shock.
1 June 2026 in APL Photonics
The measurement of the electron temperature distribution of hotspot requires bremsstrahlung imaging with both spectral resolution and spatial resolution. The Kirkpatrick–Baez (KB) microscope is an important diagnostic device in inertial confinement fusion experiments, which can realize high spatial resolution imaging of multi-energy. However, conventional KB microscopes face a fundamental trade-off between achieving a quasi-monoenergetic response and maintaining uniform efficiency across the field of view. This inherent limitation leads to difficulties in efficiency calibration and can introduce distortion in hotspot images, thereby preventing their effective application in the quantitative measurement of hotspot radiation intensity. This paper proposes a four-energy-point KB microscope with a self-adjusting spectral response, in which the response energies adapt to the field-of-view position. The design simultaneously achieves a quasi-monoenergetic response and a uniform efficiency distribution, thereby mitigating hot-spot image distortion and simplifying efficiency calibration. Each channel of this microscope achieves a spectral resolution of ΔE/E ∼ 10%, and the efficiency uniformity (relative standard deviation: ση/η̄) within the ±150 μm field of view is 6.27%–9.63%. The spatial resolution at the center of the field of view is better than 5 μm. We deployed this microscope for implosion hotspot imaging, successfully acquiring images at four distinct energy points. These images are suitable for diagnosing hotspot electron temperature.
1 November 2026 in Review of Scientific Instruments
Quantitative analysis of inertial confinement fusion (ICF) implosion hotspots requires accurate measurements of spatially distributed x-ray emission spectra. Kirkpatrick–Baez (KB) x-ray microscopes are widely used for hotspot diagnostics in major ICF facilities; however, accurate calibration of their full-field and full-spectrum response efficiency remains challenging due to multi-parameter coupling and spatially nonuniform optical response. In this study, we present an efficient calibration method for a KB microscope by combining theoretical modeling with experimental reflectivity measurements. The response efficiency is described in terms of the collection solid angle, magnification, and angle-dependent mirror reflectivity, while experimental data are used to calibrate key model parameters, including the effective grazing incidence angle and a global intensity correction factor accounting for system-level losses. The method is applied to a four-channel, energy-adaptive KB microscope, enabling determination of the spatial distribution of the effective response energy and the full-spectrum response efficiency over the entire field of view. This approach provides a reliable basis for quantitative ICF hotspot imaging diagnostics.