1 October 2015 in Composite Structures
1 March 2018 in Composite Structures
3 August 2018 in Science and Engineering of Composite Materials
The bond strength between fibre-reinforced polymer (FRP) rebars and concrete is one of the most significant aspects of composite behaviour for rebars and concrete. In this study, a database of 408 beam type specimens consisting of beam end specimens, beam anchorage specimens and splice beam specimens was compiled from the current literature and used to develop a simple prediction using the artificial neural network (ANN). The data used for modelling were organised in a format of eight input parameters that include FRP type, cover bar surface, confinement, bar diameter (
d
b
), concrete compressive strength ( f c ) $(\sqrt {{f_c}} )$ , minimum cover-to-bar-diameter ratio (
c/d
b
), bar-development-length-to-bar-diameter ratio (
l/d
b
), and the ratio of the area of transverse reinforcement to the product of transverse reinforcement spacing, the number of developed bars and bar diameters (
A
tr
/snd
b
). Additionally, a simple prediction formula by regression analysis was developed. The root mean square error and R 2 values of the testing data were found in order to compare the results of both ANN and the proposed model with existing regulations. The new ANN model predicts the bond strength of FRP bars in reinforced concrete with 0.8989 R 2 , thus yielding better results when compared with existing regulations.
1 April 2015 in Journal of Performance of Constructed Facilities
After the Northridge and Kobe earthquakes important experimental programs on beam-to-column connections were developed because of brittle fractures at welded beam-to-column connections. A number of studies are being carried out on a variety of materials and systems that dissipate the seismic loading effects in order to improve the seismic performance of steel frames. In the research reported in this paper, a slit steel damper system was developed to prevent the damage formation of standard columns and beams by dissipating lateral loads at the beam-to-column connections of steel frames. Therefore, the columns and beams of steel frames will not be damaged after a heavy earthquake, and the structures might be put into the service again simply by replacing the dampers at the connection sites. The seismic performance of the studied connection was verified through cyclic tests of two full-scale steel frames that had slit dampers and of one specimen that had a conventional extended end-plate connection. ...
1 September 2012 in Engineering Structures
1 May 2010 in KSCE Journal of Civil Engineering
This study investigates the use of Genetic Programming (GP) to model Reinforced Concrete (RC) beam torsional strength. Experimental data of 76 rectangular RC beams from an existing database were used to develop the GP model. The following input parameters, which affect torsional strength, were selected: beam cross-sectional area, closed stirrup dimensions, stirrup spacing, closed stirrup cross-sectional area of one leg, stirrup and longitudinal reinforcement yield strength, stirrup steel ratio, longitudinal reinforcement steel ratio and concrete compressive strength. Moreover, a short review of well-known building codes in relation to the design of RC beams under pure torsion is presented. The accuracy of the codes in predicting the RC beam torsional strength was also compared with the proposed GP model using the same test data. The study concludes that the proposed GP model predicts RC beam torsional strength more accurately than building codes