The scaling-up of electrochemical CO2 reduction requires circumventing the CO2 loss as carbonates under alkaline conditions. Zero-gap cell configurations with a reverse-bias bipolar membrane (BPM) represent a possible solution, but the catalyst layer in direct contact with the acidic environment of a BPM usually leads to H2 evolution dominating. Here we show that using acid-tolerant Ni molecular electrocatalysts selective (>60%) CO2 reduction can be achieved in a zero-gap BPM device using a pure water and CO2 feed. At a higher current density (100 mA cm-2), CO selectivity decreases, but was still >30%, due to reversible product inhibition. This study demonstrates the importance of developing acid-tolerant catalysts for use in large-scale CO2 reduction devices.
5 July 2023 in Journal of the American Chemical Society
Imidazolium ionic liquids are potentially useful solvents for both carbon dioxide reduction conversion and capture. In particular electrocatalytic CO2 reduction has been shown to occur at low overpotentials using a 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM][OTf]) and water mixed solvent. A limitation of such solvent systems is their viscosity, making it hard to maintain reasonable catalytic current densities without energy intensive stirring/agitation of the electrolyte. Here we explore the electrochemical reduction of CO2 at high pressures (0.1 to 5.1 MPa) and demonstrate a correlation between the volume of expansion of the ionic liquid and the achieved catalytic current density. The improved electrocatalytic behaviour is proposed to be due to both the increased bulk CO2 concentration and the improved mass transport properties of the gas-expanded ionic liquid. These initial studies at pressure represent a step towards realising an integrated CO2 capture and utilisation system based around a common ionic liquid.