18 April 2024 in IEEE Transactions on Microwave Theory and Techniques
In this article, the double-ridge waveguide (WG) is investigated for designing high-performance balanced bandpass filter (BPF) and filtering power divider (FPD). It can be found that the two ridges’ surface currents under fundamental mode operation have inherent characteristic of same amplitude and anti-phase. Based on this, an in-line balanced BPF using double-ridge WG resonators is designed while the coupling between the resonators is fulfilled by the evanescent mode of the rectangular WG. The high common-mode (CM) suppression in the frequency range of interest is obtained naturally. On the basis of the filter prototype, a balanced FPD can be easily implemented by proper adding the outputs on the last ridge resonator. For demonstration, both of them have been fabricated and measured. Measured results indicate that the filtering response centers at 3.5 GHz and the 3-dB fractional bandwidth (FBW) is about 13% with an insertion loss (IL) of $<$ 0.35 dB. Both balanced BPF and FPD have wide and high differential-mode (DM) upper stopband rejection, and the CM suppression is better than 65 dB in the passband.
11 December 2024 in IEEE Transactions on Microwave Theory and Techniques
This article proposes a controllable and quantizable coupling structure for ridge waveguide (WG) resonators, which is utilized to design miniatured bandpass filter (BPF) and filtering balun. It consists of ridge WGs and evanescent rectangular WGs with nonuniformed widths. The evanescent WGs between the ridge resonators can be equivalent to a T-shaped three-inductor network, and then its width is able to adjust the inductive coupling strength. As the width decreases, i.e., the shunt inductor is also decreased, the distance between the resonators is reduced so that the coupling strength between them can be maintained. Based on this, an inline filter is designed with a compact structure and two transmission zeros (TZs) are introduced. Based on the filter prototype, a double-ridge WG filtering balun is created by stacking two BPFs in a mirror structure. A metal plate in the middle is inserted to suppress two harmonics near the passband, thereby achieving a good out-of-band performance. For demonstration, a three-order BPF and filtering balun are fabricated and measured. Measured results indicate both of them have the advantages of low loss and compact size. Furthermore, the spurious-free frequency response of both designs is over three times the passband frequency.
19 February 2024 in IEEE Microwave and Wireless Technology Letters
A wideband double ridge waveguide (DRWG) balun is proposed in this letter. The DRWG, as a variation of rectangular waveguides, provides low transmission loss. Meanwhile, it exhibits frequency-independent out-of-phase and equal power splits between its two ridges, ensuring low-amplitude imbalance and antiphase in the balun. By analysis of the DRWG structural parameters, the cutoff frequency is reduced while the bandwidth between fundamental and higher mode cutoff frequencies is expanded simultaneously, resulting in a compact design and the wideband operation of the proposed balun. For demonstration, the DRWG balun is designed and fabricated, and the simulated and measured results with good agreement are presented. The balun centered at 2.75 GHz illustrates a 76.4% bandwidth with a return loss of more than 15 dB. Within the wide bandwidth, the insertion loss is less than 0.25 dB, and the amplitude imbalance is $\pm$ 0.17 dB while the phase difference between the two outputs is 180 $^{\circ}$ $\pm$ 0.8 $^{\circ}$ .
24 October 2023 in IEEE Antennas and Wireless Propagation Letters
This letter introduces a frequency tunable dielectric resonator (DR) antenna (DRA) with top-loaded rotatable anisotropic metasurface. The metasurface at different angles can be equivalent to materials with different permittivity. As a result, the frequency of the DRA operating at TMδ11 mode can be continuously adjusted. The working mechanism of the proposed tunable DRA is given in detail. Since both mechanical tuning scheme and DR are adopted, the proposed design shows high efficiency (low loss) and small size. For demonstration, a differential-feeding prototype is fabricated and measured. The center frequency can be tuned from 6.64 to 6.96 GHz as the metasurface is rotated by 90º. Within it, the radiation pattern is stable and the radiation efficiency is more than 76%.
22 August 2024 in IEEE Microwave and Wireless Technology Letters
This article investigates a spoof surface plasmon polariton (SSPP) first by etching the inverted T-shaped slot on the central ridge of the ridge waveguide (WG) for constructing a low-loss bandpass filter (BPF). To achieve flexible bandwidth, the upper and lower edges of the passband can be controlled independently by the SSPP and double gratings (DGs) on both sides of the ridge WG. Furthermore, the lower impedance of the ridge WG allows it to be directly connected to the coaxial connector to achieve a compact size. To validate the approach, an $X$ -band ridge WG BPF is fabricated with a measured bandwidth of 7.9–12.2 GHz. The good agreement between simulation and measurement results demonstrates the method’s advantages of small size, flexible controlling of bandwidth, and low insertion loss (IL) of 0.23 dB.
15 October 2024 in IEEE Microwave and Wireless Technology Letters
This letter presents a novel filtering balun design based on a three-stage evanescent mode single ridge waveguide (RWG) filter with a staged matching structure. Incorporating the ridge resonator and matching ridge, the asymmetrical design achieves both an evanescent mode filter and an unbalanced-to-balanced transition. The asymmetry in two directions enables a single ridge to transform into a double ridge structure utilizing three different sizes of resonators. This layout facilitates the transformation of single-ended signals into differential signals. Demonstrated results show good agreement between simulated and measured performance, with the balun centered at 3.7 GHz exhibiting a 21.6% 3-dB bandwidth (3-dB BW), return loss exceeding 15 dB, insertion loss around 0.25 dB, and minimal amplitude and phase imbalances of $\pm$ 0.4 dB and $\pm$ 2.5 $^{\circ}$ , respectively.