The calculation of phase shift and optical path difference in birefringent media is related to a wide range of applications and devices. We obtain an explicit formula for the phase shift introduced by an anisotropic uniaxial plane-parallel plate with arbitrary orientation of the optical axis when the incident wave has an arbitrary direction. This allows us to calculate the phase shift introduced by waveplates when considering oblique incidence as well as optical axis misalignments. The expressions were obtained by using Maxwell’s equations and boundary conditions without any approximation. They can be applied both to single plane wave and space-limited beams.
The fringe pattern obtained when a divergent (or convergent) beam goes through a sample of birefringent crystal between two crossed polarizers contains information that is inherent to the crystalline sample under study. The formation of fringe patterns is analyzed from distinct approaches and with different degrees of approximation considering cones of light of large numerical aperture. We obtain analytic explicit formulas of the phase shift on the screen and compare them with the exact numerical solution. The results obtained are valid for arbitrary orientation of the optical axis and are not restricted either to low birefringence or to small angles of incidence. Moreover, they enable the extraction of the main features related to the characterization of uniaxial crystal slabs, such as the optical axis tilt angle and the principal refractive indices.
In this work, a general architecture for the implementation of software-defined optoelectronic systems (SDOs) is described. This concept harnesses the flexibility of softwaredefined hardware (SDH) to implement optoelectronic systems which can be configured to adapt to multiple high speed optical engineering applications. As an application example, a software-defined optical interferometer (SDOI) using a commercial software-defined radio (SDR) platform is built. The system is tested by performing high speed optical detection of laserinduced photoacoustic signals in a concentrated dye solution. Using software modifications only, conventional single carrier and also multicarrier heterodyne techniques with space and frequency diversity are performed. The latter technique shows a noticeable performance improvement in single-shot interferometric measurements.