Polyester-based, self-adhesive asphalt waterproofing membranes have garnered significant attention due to their extensive use in building-waterproofing projects, with their resistance to aging in complex environments being particularly crucial. This study evaluates the performance changes of these membranes under thermo-oxidative aging and freeze–thaw cycling conditions. The thermo-oxidative aging process was simulated using a thin-film oven and combined with freeze–thaw cycle tests to assess membrane performance at various aging stages. Changes in functional groups were analyzed via Fourier Transform Infrared Spectroscopy (FTIR), and tests for low-temperature flexibility, tensile properties, and peel strength were conducted. The results demonstrated that aging significantly reduced the membrane’s low-temperature flexibility and peel strength, accompanied by oxidative reactions and a loss of lightweight components. This study provides essential data on the aging behavior of the membrane and offers a theoretical foundation for its long-term application in practical engineering.
Pipe–soil interaction encompasses the study of stress distributions and deformation mechanisms occurring between buried pipelines and their surrounding soil. Understanding the mechanical behavior of this coupled system is essential for the analysis of deformation patterns and failure modes in buried pipelines, thereby providing critical guidance for construction design and risk assessment protocols. Traditional analytical approaches have relied on classical mechanics theories and experimental methodologies; however, these approaches often incorporate excessive simplifications and assumptions that inadequately represent the complex properties of both soil and pipeline structures. Numerical simulation methodologies have emerged as viable alternatives for investigating pipe–soil interaction. Among these numerical approaches, Smoothed Particle Hydrodynamics (SPH)—an advanced Lagrangian meshless particle method—offers distinct advantages in modeling complex behaviors, including free surfaces, deformable boundaries, and large deformation scenarios that characterize pipe–soil interaction. This research establishes a pipe–soil interaction model for buried pipelines utilizing the SPH method, incorporating elastic–plastic constitutive relationships to represent soil behavior. The investigation examines lateral interaction mechanisms, vertical interaction responses in sandy soils, and the parametric influence of various soil properties on pipe–soil interaction characteristics. This study contributes insights into the application of meshfree numerical simulation techniques for pipe–soil interaction analysis, offering both engineering utility and theoretical advancement for pipeline infrastructure design and safety assessment.
Low-temperature conditioning is a key procedure in the flexibility evaluation of waterproofing membranes and directly affects the reliability of subsequent performance assessments. However, the internal unsteady-state heat transfer kinetics and the thermal gradient evolution mechanisms in multi-layer composite membranes under transient cold shocks require further investigation. Focusing on commonly utilized 3 mm and 4 mm thick SBS (Styrene–Butadiene–Styrene)-modified bitumen waterproofing membranes as subjects, this study investigated the internal dynamic temperature fields and microstructural response of bituminous waterproofing membranes under standard low-temperature flexibility testing conditions. By accurately pre-embedding micro-temperature sensors in situ at the interface between the surface layer and the reinforcement matrix, the transient thermal response profiles of specimens with varying specifications in a −25 °C liquid environment were quantified. Simultaneously, a three-dimensional transient heat conduction finite element model was established to elucidate the dynamic evolution of internal spatial temperature gradients. The congruence between experimental and numerical results demonstrates that upon exposure to extreme cold, composite membranes of different thicknesses exhibit a pronounced “surface-to-core” heat transfer lag effect. The cooling rate maximized within the initial 10 min of exposure. Conversely, the internal interface layer—acting as a high-thermal-resistance zone and the most unfavorable point for heat conduction—necessitated 10~20 min of nonlinear thermal dissipation to stabilize at the target ambient temperature. This study clarifies the transient thermal response and temperature-field evolution laws of bituminous waterproofing membranes, providing a robust theoretical framework for elucidating low-temperature embrittlement mechanisms and informing the material design and application of waterproofing projects in cold regions.