Compensating for the infinite number of actuator faults considered in nonlinear multi-manipulator systems is a significant, yet a crucial issue for control problems. In view of this, a novel fuzzy adaptive fault-tolerant control algorithm is proposed for nonlinear multi-manipulator systems to eliminate the influence of actuator faults and improve accuracy essentially, as well as achieve the objective of containment. First, a Lyapunov function is constructed by replacing the square term of the error with a series of smooth functions. Moreover, a predefined accuracy function is introduced and a new fuzzy adaptive fault-tolerant containment control scheme is designed. This overcomes the problem that existing methods cannot guarantee the negative-definite property of time derivative of Lyapunov function between two adjacent actuator faults. And it also ensures the boundedness of containment errors. Furthermore, projection-based adaptive parameters and the turning function are fused to compensate the influence of actuator faults. Finally, the effectiveness of the designed control scheme is verified by a simulation example of multiple single-link manipulator systems.
4 October 2024 in IEEE Transactions on Industrial Electronics
To remove the influence of system initial values and controller parameters on the settling-time function of finite/fixed-time control, a prescribed-time fuzzy adaptive control is designed for $\boldsymbol{n}$-link robotic manipulators in this work. The proposed setting-time function only relies on the parameters of the prescribed-time function and is no longer determined by the initial system value and controller parameters. By setting the convergence range of tracking error, the chattering of tracking error is reduced. Moreover, the dead zone input issue is addressed by using the dead-zone slope and boundary value theory. Based on the above methods, the designed prescribed-time fuzzy adaptive controller can ensure that all system signals are bounded, and the tracking error can converge to a preset interval within a prescribed time. Finally, experiments of a two-link robotic manipulator are conducted to verify the superiority of the developed control approach.
28 October 2025 in IEEE Transactions on Fuzzy Systems
In order to eliminate the impact of actuator faults on manipulator control accuracy and save the system communication resources, this paper proposes a dynamic-memory event-triggered fuzzy adaptive fault-tolerant control algorithm based on a novel switching mechanism. First, according to the dynamic evolution characteristics of tracking error, a new actuator switching mechanism is constructed by combining the proposed performance indicator function. As the tracking error exceeds the preset convergence interval, the designed switching mechanism can automatically search for and switch to the optimal actuator operating mode without relying on the fault detection and isolation module, which eliminates the influence of the faults and ensures the control accuracy of the manipulator system. On this basis, a prescribed-time function is introduced to improve the convergence rate of the tracking error, and the settling time can be set in advance. Meanwhile, a dynamic-memory event-triggered control strategy is designed to extend the trigger interval by integrating the historical information of dynamic variables, which can effectively save the system communication resources under the premise of ensuring the control effect. Finally, the superiority of the proposed control algorithm is illustrated by the experimental platform of a 2-degree-of-freedom manipulator.