Electrochemically induced sol-gel depositions have become a widespread, versatile method for fabricating hybrid and nanostructured oxides on conductive substrates. The process is based on the buildup of electrochemically generated OH− in the diffusion layer near the electrode surface. For the electrodeposition of silica thin films, these OH− ions catalyze the gelation of a kinetically stable precursor solution, thereby resulting in an electrochemically controlled process. The control of the diffusion layer has proven pivotal to depositing thin films while preventing the formation of aggregated by-products deeper in the solution. In this work, the silica sol-gel reactions and electrochemical OH− generation were critically analyzed and described to gain insight into the deposition mechanism. A general model is proposed that predicts the pH profile during both stationary and rotating disk electrode depositions under different conditions (i.e., current densities, times, and rotation rates). This model provides insights into the reactive zones where gelation occurs, and explains typical phenomena observed during deposition such as the dependence of film growth rates and aggregate formation on the deposition conditions. The insights and expressions obtained in this work are invaluable when designing future experiments using novel chemistries or setups.
Electrochemically induced sol-gel deposition is a powerful method for synthesizing oxide and composite thin films directly onto conductive substrates. By applying cathodic currents, OH- ions are locally generated, triggering rapid gelation near the electrode surface. This technique has previously enabled the formation of mesoporous silica films using surfactant templates. Here, the method is extended to incorporate an ionic liquid electrolyte (ILE) as the templating agent, enabling direct electrodeposition of ILE-silica composite electrolytes. These nanocomposites combine the mechanical stability of silica with the high ionic conductivity of ILEs. Unlike conventional sol-gel approaches requiring days for solidification, this electrochemical process enables film growth within minutes, with tunable thicknesses (1–34 μm). The deposited layers were characterized by scanning electron microscopy, Raman, and Fourier-transform infrared spectroscopy, and integrated into all-solid-state thin-film test cells using TiO2, LiMn2O4 (LMO), and LiNi0.5Mn1.5O4 (LNMO) cathodes with lithium metal anodes. TiO2-based cells showed excellent compatibility and stable cycling over 75 cycles. For L(N)MO cells, a pre-lithiation step was required to prevent cathode degradation. Ionic conductivities of 0.1–0.5 mS cm−1 were measured. This work demonstrates a fast, scalable, and versatile approach for integrating solid electrolytes directly onto battery electrodes, bridging the gap between liquid-based processing and solid-state battery performance.