A model order reduction method to recursively compute a Cauer ladder network from static finite-element solutions is extended for use with a double vector potential formulation, which decreases difficulties in solving the finite-element equation system. In addition, the connection between the boundary condition and the viability of the solution is demonstrated. Finally, the method is applied to two examples.
29 September 2022 in IEEE Transactions on Control Systems Technology
This article proposes a decentralized model predictive control (DMPC) algorithm without communication for systems consisting of multiple identical, independent actuators acting on a single central plant. The particular system design is relevant for applications where modularity is paramount and for highly dynamic systems, e.g., battery emulator systems controlled by multiple dc–dc converter modules. Each agent, consisting of an actuator and a DMPC, controls a virtually scaled version of the plant to implicitly consider the effects of other agents. The set of DMPCs achieves the same plant performance as a corresponding centralized model predictive controller (CMPC) in unconstrained operation. Also, the states of the independent agents converge toward the globally optimal CMPC solution. This is obtained by dividing the CMPC’s objective function into local objective functions related to the subsystems. The optimality and stability of the DMPC in unconstrained operation are shown analytically. The stability of control input-constrained operation is analyzed by computing the region of attraction. Numerical studies of a battery emulator system compare the performance of the DMPC with the global optimum in detail.
16 February 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In this article, a new method for controlling battery emulators in the shape of bidirectional step-down converters driving constant power loads (CPL) is presented. The CPL introduces nonlinear behavior into the system and causes unstable system dynamics. This property and the discontinuity introduced by the switches make it challenging to develop a suitable control strategy. Usually, switching frequencies are assumed to be fast enough for the controller to neglect the fact that the switches are either ON or OFF. As the desired dynamics of the system approaches the switching frequency of the converter, the discontinuity of the switches can no longer be ignored and the controller has to generate a suitable piecewise constant control input. A novel approach for arriving at a piecewise constant control input is presented and compared to state-of-the-art approaches. The advantages of the new control method are demonstrated with simulations as well as measurements from a hardware-in-the-loop testbed.
This contribution deals with the control of a battery emulator used in automotive testbeds for electric drivetrains. The battery emulator, which is realized as a DC-DC converter, is connected to a unit-under-test (UUT), e. g., an electric motor inverter. To accurately emulate the dynamic impedance of a battery, a highly dynamic output is required. Additionally, battery emulators should be applicable for a large variety of UUTs, hence robust performance in a large operating range is also required. This is especially challenging when the UUT behaves like a constant power load, as this can cause stability issues. To meet the requirements, a flatness-based control concept is presented that establishes feedback equivalence between a nonlinear and a linearized system representation. By examining the stability of the concept, an estimation of the region of attraction is found.
26 July 2022 in IEEE Open Journal of Industry Applications
This paper presents a method for highly dynamic nonlinear control of DC-DC converters with constraints used in battery emulators. Controlling this system is particularly challenging as the connected units-under-test often behave like constant power loads (CPLs), which introduce unstable system dynamics and render the system nonlinear. In order to achieve fast output dynamics with the DC-DC converters over a large operating range, a special control architecture is proposed where feedback equivalence is established between a nonlinear system description and a linear description. The nonlinear system dynamics can then be transformed into linear ones for controller synthesis by exploiting the flatness property of the system. Additionally, constraints have to be met at any time during operation to prevent damage to components. In order to satisfy the constraints, a reference governor (RG) is added to the loop. This novel RG concept uses a low-pass filter in the shape of a PT1-element to modify the voltage reference. By changing the time constant of the PT1-element, the RG is able to generate smooth constraints-aware trajectories for setpoint changes. Finally, the capabilities of the control concept are demonstrated and discussed based on high-fidelity simulations.
17 November 2015 in e+i Elektrotechnik und Informationstechnik