20 February 2019 in ACS Energy Letters
1 May 2004 in Electrochemistry Communications
10 March 2005 in Journal of Materials Chemistry
Nanoporous composite films of multi-walled carbon nanotubes (MWNTs) and polyaniline (PAn) were grown electrochemically from acidic aqueous solutions, such that the constituents were deposited simultaneously onto graphite electrodes. Scanning electron microscopy (SEM) revealed that the composite films consisted of nanoporous networks of MWNTs coated with PAn. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) demonstrated that these composite films had similar electrochemical response rates to pure PAn films, but a lower resistance and much improved mechanical integrity. The specific electrochemical capacitance of the composite films, per unit area of the original electrode, reached as high as 3.5 F cm−2, a significantly greater value than that of 2.3 F cm−2 for pure PAn films prepared similarly.
18 March 2022 in Science Advances
Solid electrolytes are highly important materials for improving safety, energy density, and reversibility of electrochemical energy storage batteries. However, it is a challenge to modulate the coordination structure of conducting ions, which limits the improvement of ionic conductivity and hampers further development of practical solid electrolytes. Here, we present a skeleton-retained cationic exchange approach to produce a high-performance solid electrolyte of Li 3 Zr 2 Si 2 PO 12 stemming from the NASICON-type superionic conductor of Na 3 Zr 2 Si 2 PO 12 . The introduced lithium ions stabilized in under-coordination structures are facilitated to pass through relatively large conduction bottlenecks inherited from the Na 3 Zr 2 Si 2 PO 12 precursor. The synthesized Li 3 Zr 2 Si 2 PO 12 achieves a low activation energy of 0.21 eV and a high ionic conductivity of 3.59 mS cm −1 at room temperature. Li 3 Zr 2 Si 2 PO 12 not only inherits the satisfactory air survivability from Na 3 Zr 2 Si 2 PO 12 but also exhibits excellent cyclic stability and rate capability when applied to solid-state batteries. The present study opens an innovative avenue to regulate cationic occupancy and make new materials.
24 April 2019 in Advanced Science
A hybrid ion capacitor (HIC) based on potassium ions (K+) is a new high‐power intermediate energy device that may occupy a unique position on the Ragone chart space. Here, a direct performance comparison of a potassium ion capacitor (KIC) versus the better‐known sodium ion capacitor is provided. Tests are performed with an asymmetric architecture based on bulk ion insertion, partially ordered, dense carbon anode (hard carbon, HC) opposing N‐ and O‐rich ion adsorption, high surface area, cathode (activated carbon, AC). A classical symmetric “supercapacitor‐like” configuration AC–AC is analyzed in parallel. For asymmetric K‐based HC–AC devices, there are significant high‐rate limitations associated with ion insertion into the anode, making it much inferior to Na‐based HC–AC devices. A much larger charge–discharge hysteresis (overpotential), more than an order of magnitude higher impedance RSEI, and much worse cyclability are observed. However, K‐based AC–AC devices obtained on‐par energy, power, and cyclability with their Na counterpart. Therefore, while KICs are extremely scientifically interesting, more work is needed to tailor the structure of “Na‐inherited” dense carbon anodes and electrolytes for satisfactory K ion insertion. Conversely, it should be possible to utilize many existing high surface area adsorption carbons for fast rate K application.
7 December 2022 in ACS Applied Energy Materials