Satya Venkata Kishore Pulavarthi

Satya Venkata Kishore Pulavarthi

Auto-generated profile, based on publicly available information

Satya Venkata Kishore Pulavarthi

Department of Electrical and Electronics Engineering, Sri Vasavi Engineering College, Tadepalligudem, India

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 February 2022 in IEEE Access
Verified
Journal Article
Open access
SJSwamy Jakkula
Swamy Jakkula
NJNakka Jayaram
Nakka Jayaram
SPSatya Venkata Kishore Pulavarthi
Satya Venkata Kishore Pulavarthi
YSYannam Ravi Shankar
Yannam Ravi Shankar
JRJami Rajesh
Jami Rajesh
The contribution of renewable energy, especially small-scale solar photovoltaics (PV), is increasing exponentially in the energy sector. In general, high gain DC-DC converters are used as front-end converters to increase the low voltage of PV panels; further, the DC-AC converter (multilevel inverters) is used for standalone AC loads or grid integration. To avoid the front-end converter and achieve both objectives, this paper proposes a nine-level quadruple boost inverter topology for small-scale solar PV applications. The proposed topology operates on a switched capacitor technique to boost the voltage, and has self-voltage balancing of capacitors. This paper presents the detailed operation of the proposed nine-level inverter, voltage stress calculations, loss analysis, and designing of circuit parameters. In addition, a high-gain generalized multilevel inverter (MLI) topology is also reported. Furthermore, the proposed MLI is compared with competitive inverters available in the recent literature. The proposed MLI topology has advantages such as a minimum total standing voltage and a reduced component count; it can also produce bipolar voltage inherently. The performance of the proposed MLI topology is validated through the MATLAB-based simulations and an experimental prototype. Further, the experimental results are presented by considering load variations, modulation index variations, and output frequency variations. The experimental efficiency obtained is in the range of 96.2% to 92.8% for proposed 9-level inverter.

13 July 2022 in IEEE Access
Verified
Journal Article
Open access
PKPulavarthi Satya Venkata Kishore
Pulavarthi Satya Venkata Kishore
NJNakka Jayaram
Nakka Jayaram
SJSwamy Jakkula
Swamy Jakkula
YSYannam Ravi Sankar
Yannam Ravi Sankar
JRJami Rajesh
Jami Rajesh
SHSukanta Halder
Sukanta Halder
This paper proposes a new reduced switch count seven-level triple boost inverter based on switched capacitor technique. The proposed topology has fewer number of components and has the ability of balancing the voltage across the capacitors. The structure of the proposed topology is very simple and can be easily extended to higher number of voltage levels. The generalized structure for higher number of levels is presented. The level shifted pulse width modulation approach is used to evaluate the proposed topology. In addition, design of switched capacitors and power loss calculation of semiconductor switches are provided. This proposed inverter topology is compared with the state-of-art topologies to demonstrate its superior performance. Further, thermal modelling of the topology is done in PLECS to calculate the power losses and efficiency. Finally, this proposed 7-level topology is simulated using MATLAB/Simulink and tested on experimental prototype for the performance verification and the results are included.

4 October 2022 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
Verified
Journal Article
Closed access
GAGaurav
Gaurav
NJNakka Jayaram
Nakka Jayaram
SHSukanta Halder
Sukanta Halder
KPKaibalya Prasad Panda
Kaibalya Prasad Panda
SPSatya Venkata Kishore Pulavarthi
Satya Venkata Kishore Pulavarthi
This article presents a multiport and multioperating DC–DC converter topology with high step-up output. The proposed converter topology includes two input ports and four switches. Compared to the recently developed topologies, the proposed topology utilizes a minimum number of components and produces high voltage gain. Modularity in shape, simple structure, continuous input, and low input current ripple are the other advantages of the proposed topology. The proposed topology enables bidirectional power flow by interchanging one of the diodes with a switch. Due to flexibility in design, the proposed topology presents a possibility for integrating multiple sources as in a renewable energy conversion system. Smooth switching between the operating modes and reduced voltage stress on switching devices are the other advantages. The working principle of the proposed converter is analyzed thoroughly in steady state. A detailed comparison is carried out considering several performance parameters to show the advantages of the proposed converter. With a proposal to extend the multi-input topology for high voltage boosting application, simulations are carried out for the dual input topology in MATLAB/Simulink platform. The performance of the converter is also validated experimentally on a dSPACE1104 control platform.

18 November 2022 in IEEE Access
Verified
Journal Article
Open access
SASairaj Arandhakar
Sairaj Arandhakar
NJNakka Jayaram
Nakka Jayaram
YSYannam Ravi Shankar
Yannam Ravi Shankar
GAGaurav
Gaurav
PKPulavarthi Satya Venkata Kishore
Pulavarthi Satya Venkata Kishore
SHSukanta Halder
Sukanta Halder
Transportation is currently advancing towards Electric Vehicle (EV) technology. This paper presents a brief and systematic analysis of the real-time issues obtained in Electric Vehicles (EVs) due to the various ranges of energy storage devices. In general, EV energy management system is integrated with power electronic circuits for effective power conversion and reliable operation. Some issues are addressed while using the batteries in EV systems such as charging time, efficiency of battery, and raw materials. Not only battery issues but also real-time non-technical issues and operational issues are also discussed in this paper. During energy conversion with power electronic circuits, the system attains extreme temperature levels which in turn reduces the performance of the system. To maintain an optimum temperature level, it is important to study the temperature effect of the system at the most prior levels. Due to the adaption of power electronic components, some extent of noise is generated, technically treated as Electromagnetic Interference (EMI), as system capacity increases the EMI content also improved proportionately. Therefore, to mitigate the EMI effect, the low pass filter-based EMI filter is introduced in the system such that the noise level is suppressed. Bidirectional Charging System (BCS) is one of the emerging technologies in EV to obtain autonomous power supply systems in the form of Vehicle to Grid (V2G), Grid to Vehicle (G2V), and Vehicle to Load (V2L). To know the behaviour of BCS the proposed RNN controller is employed and is compared with ANN bidirectional charging model. BCS charging system with RNN controller has better dynamic response to exchange the power via DC/DC converter and AC/DC converter as compared to ANN controller.

21 November 2023 in IEEE Access
Verified
Journal Article
Open access
GAGaurav
Gaurav
NJNakka Jayaram
Nakka Jayaram
SHSukanta Halder
Sukanta Halder
KPKaibalya Prasad Panda
Kaibalya Prasad Panda
SPSatya Venkata Kishore Pulavarthi
Satya Venkata Kishore Pulavarthi
YSYannam Ravi Shankar
Yannam Ravi Shankar
This paper presents a non-isolated bidirectional dc-to-dc converter (BDDC) topology employing a switched inductor switched capacitor (SISC) module. The bidirectional power flow capability aid to its application mainly in microgrids and electric vehicles. The switched inductor (SI) and switched capacitor (SC) cells in combination assist in the generation of high gain voltage without using a bulky transformer. The theoretical analysis of the proposed converter, its gain calculation, and small signal analysis are analyzed in detail. It benefits from having a wide voltage-gain range and less voltage stress across the power switches. Also, the proposed (SISC-BDDC) can operate both in boost and buck modes. Simulations are carried out for both the modes using MATLAB/Simulink platform. A 200 W prototype is also developed to operate with V in = 12 V and V out = 160-200V. Using the dSPACE1104 control platform, the maximum efficiency of 95.25% of the converter is justified in steady and transient operating conditions.

22 March 2023 in IEEE Access
Verified
Journal Article
Open access
SKSrimannarayana Kovvali
Srimannarayana Kovvali
NJNakka Jayaram
Nakka Jayaram
SPSatya Venkata Kishore Pulavarthi
Satya Venkata Kishore Pulavarthi
YSYannam Ravi Shankar
Yannam Ravi Shankar
JRJami Rajesh
Jami Rajesh
VPV. Gouri Prasant
V. Gouri Prasant
Conventional energy sources will not be sufficient to meet future electrical demands, and also pollute the environment. Therefore, to meet their electrical energy needs, and maintain clean and green environmental conditions, people are focusing more on renewable energy sources. Small-scale PV solar standalone AC loads or grid integration applications need high voltage at a desired level, transformer/inductor less operation, high gain DC-DC front-end converters, and DC-AC converters. To achieve all the above objectives, this paper proposes a step-up quadruple boost nine-level inverter, it works on switched capacitor technique with a reduced count of components for the application of renewable energy systems. The proposed topology balances the capacitor voltages with the control scheme itself without using any sensors. A level-shifted pulse-width modulation (LPWM) technique can be used in the control strategy of the proposed topology. This paper covers the operational modes of the proposed topology, voltage stress calculations, capacitors calculations, and losses calculations at various stages and compared with recent literature, that reveals this topology is more advantageous in terms of less total standing voltage, switch count, cost factor, better efficiency and the number of gate driver circuits. The theoretical performance can be validated through MATLAB/Simulink-based simulation and their results are validated through prototype experimentation. Further, the experimental results contain modulation index variations, frequency modulation, switching frequency variations, input voltage variations, and load variations. Finally, the max efficiency of 96.5% is achieved for the experimental prototype of the proposed topology.