Applications such as observing transient phenomena in materials and real-time terahertz (THz) spectroscopic imaging of molecules have highlighted the importance of high repetition rate, high power THz radiation sources with a broad frequency tuning range. Nevertheless, the development of such sources remains a bottleneck, hindering the advancement of these applications. We have recently developed a high repetition rate, picosecond-pulsed THz parametric amplifier system driven by a passively mode-locked femtosecond fiber laser, which can be synchronized to an external reference signal with sub-picosecond timing jitter. The system operates stably with a frequency tuning range from 1 to 6 THz. It achieves a maximum peak power of 4.3 kW at 5.7 THz when operating at 10 kHz and a maximum average power of 470 μW at the same frequency under 100 kHz operation. This THz source can not only serve as a seed for THz free-electron laser amplifiers, but also provide precise timing control for various THz applications.
Coherent pulse stacking provides flexible and stable temporal waveform control of picosecond laser pulses, yet its implementation in ytterbium-doped (Yb-doped) fiber lasers is hindered by the stringent requirement for transform-limited (TL) input pulses. Here, a chirped-pulse coherent pulse stacking scheme based on a Solc filter is proposed and demonstrated for high-repetition-rate pulse shaping in a Yb-doped fiber laser system. A frequency-domain iterative model shows that chirped pulses introduce intrinsic comb-like modulation in stacked pulses, whose period and temperature dependence differ markedly from those of TL pulses, thereby enhancing the tunability of coherent pulse stacking and extending its range of applications. Using an eight-crystal YVO 4 stacking module, we generate flat-top, sawtooth, and elliptical green laser pulses at 1 MHz and 81.25 MHz with maximum average powers of 2.1 W and 6.2 W, respectively, while maintaining strong tolerance to crystal temperature variations. The shaped pulses are applied to a CsK 2 Sb photocathode in a DC-SRF-II electron gun to generate electron bunches with an elliptical current distribution, validating the feasibility of the proposed scheme for electron bunch shaping. Overall, these results establish a robust, power-scalable route for high-repetition-rate picosecond pulse shaping in fiber-laser-driven photoinjectors and related accelerator applications.
9 July 2026 in High Power Laser Science and Engineering
We demonstrate a fiber-based deep-ultraviolet (DUV) source at 259.4 nm delivering sub-picosecond pulses with high average power in both 81.25 MHz continuous pulse train and burst-mode operation. Based on ytterbium-doped photonic-crystal fiber amplification, we achieve over 200 W infrared laser output, followed by second-harmonic generation in lithium triborate and fourth-harmonic generation (FHG) in cesium lithium borate (CLBO). At 81.25 MHz, a maximum DUV output power of 21.7 W is obtained. With burst operation, we investigate the high-power FHG performance of the CLBO crystal under varying burst energies and average powers, and optimize the FHG configuration for different burst repetition rates. At a burst repetition rate of 300 kHz, a maximum DUV burst energy of 68 μJ is achieved, and the average power reaches 25.1 W at 750 kHz, representing the highest reported average power from an all-fiber laser source in this wavelength band.