31 December 2018 in Transportation Research Procedia
The paper discusses shortcomings of the existing vehicle positioning methods and proposes an option of a non-satellite navigation system based on positioning of vehicles equipped with radars reading data from RFID tags located on road signs, traffic lights, light posts and other structures where such tags may be installed. RFID tag coordinates are predetermined, e.g. by their single assignment using any well-known global positioning system or by assignment of coordinates related only to a unique position of tags with respect to intersections and road forks and turnoffs, including those not officially shown on maps.
1 January 2017 in Transportation Research Procedia
31 December 2018 in Transportation Research Procedia
An analysis of the existing methods for assessing congestion in various traffic directions, based on global positioning and simple calculation of the number of vehicles crossing the intersection area, is provided. Disadvantages of such standard systems are identified. A method to assess the least congested direction, based on the comparison of the number of vehicles crossing the intersection per unit of time with the traffic capacity in the selected direction, is suggested.
28 November 2018 in Mordovia University Bulletin
Introduction. The influence of ultrasound parameters on the properties of processed lubricating oils and wear characteristics of friction pairs is a relevant problem in agricultural engineering. The paper presents a simple method for influencing on the lubricating oil by ultrasonic vibrations of the optimum frequency and power that results in reducing the wear of the interfaces of mechanisms and machines. The authors study the change in the physical characteristics of the oil during its ultrasound treatment and the assessment of their effect on the wear of a friction pair during long-term tests. Materials and Methods. We used a generator with variable signal parameters, a lever scale, a burette and an alcohol thermometer to assess the change in coefficient of surface tension of engine oil during sonication. Long-term tribotechnical tests were carried out on 2070 CMT-1M friction machine according to the “roller ‒ pad” scheme. The mass of these samples after long-term tests was weighed by Sartorius company analytical scales with a measurement accuracy of 0.00001 g. A profilograph-profilometer of Taylor Hobson Company was also used. Results. As a result of the research, the optimum frequency and power of ultrasound were revealed for lubricating oil processing. The decrease in the surface tension coefficient of oil was more than 5 %. With prolonged wear tests, the wear factor was reduced by 28 %. Conclusions. The effect of increasing the wear resistance of friction pairs when exposed to ultrasound oil is associated with a decrease in its surface tension coefficient, which allows the oil to be distributed with minimal effort over the surfaces with forming a film of sufficient thickness, which increases the bearing capacity of rubbing surfaces. Keywords: wear, surface tension coefficient, motor oil, tribotechnical test, ultrasound For citation: Simdiankin A. A., Davydkin A. M., Slyusarev M. N., Zemskov A. M. Evaluation of the Influence of Motor Oil Ultrasonic Processing on the Wear of Friction Pairs during Long-Term Wearing Tests. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018; 28(4):583–602. DOI: https://doi.org/10.15507/0236-2910.028.201804.583-602 Acknowledgments: The study was conducted with the financial support of the Ministry of Education and Science of the Russian Federation (state task, direction: development of competencies) project no. 11.3416.2017/4.6 “Development of technologies and tools to improve the durability of parts, assemblies, machines and equipment by creating nanostructured coatings sources of concentrated energy”.
1 July 2019 in Journal of Friction and Wear
Results of studies of the surface and wear characteristics of roller—pad friction pairs in burn-in tests with motor oil treated with ultrasound at different frequencies are presented. It has...
1 June 2020 in Entrepreneurship and Sustainability Issues
Entrepreneurship and Sustainability Issues is a peer-reviewed journal which publishes original research papers and case studies