5 May 2021 in Journal of Fluid Mechanics
Resolvent analysis identifies the most responsive forcings and most receptive states of a dynamical system, in an input–output sense, based on its governing equations. Interest in the method has continued to grow during the past decade due to its potential to reveal structures in turbulent flows, to guide sensor/actuator placement and for flow control applications. However, resolvent analysis requires access to high-fidelity numerical solvers to produce the linearized dynamics operator. In this work, we develop a purely data-driven algorithm to perform resolvent analysis to obtain the leading forcing and response modes, without recourse to the governing equations, but instead based on snapshots of the transient evolution of linearly stable flows. The formulation of our method follows from two established facts: (i) dynamic mode decomposition can approximate eigenvalues and eigenvectors of the underlying operator governing the evolution of a system from measurement data, and (ii) a projection of the resolvent operator onto an invariant subspace can be built from this learned eigendecomposition. We demonstrate the method on numerical data of the linearized complex Ginzburg–Landau equation and of three-dimensional transitional channel flow, and discuss data requirements. Presently, the method is suitable for the analysis of laminar equilibria, and its application to turbulent flows would require disambiguation between the linear and nonlinear dynamics driving the flow. The ability to perform resolvent analysis in a completely equation-free and adjoint-free manner will play a significant role in lowering the barrier of entry to resolvent research and applications.
10 February 2022 in Physical Review Fluids
Wing-gust encounters arising from flight over complex terrain or adverse weather are unavoidable and cause large lift transients that may result in structural damage due to extreme loads and or fatigue. Gust mitigation through control has the potential to extend the lifetime of air vehicles and wind turbines, although it is challenged by sensor noise, time delays, and low latency requirements. In this study, we report on the successful design and deployment of a closed-loop controller to regulate the lift coefficient of an airfoil equipped with an actuated trailing-edge flap against vortical gust disturbances. The approach is served by a feedforward-feedback control strategy and dedicated hardware. The control strategy relies on the characterization and modeling of the lift response to flap deflections and gust disturbances. In Part of this series [ Phys. Rev. Fluids 7, 024705 (2022)], we quantify and model the lift response to flap deflections. In this second part, we examine and model the gust disturbances on the airfoil lift and combine the models within the control architecture. Gust characterization reveals previously unknown synergy between concurrent gusts with opposite rotation direction, yielding large bursts of lift. The lift response model to gust disturbances is compared to Küssner's and validated against experimental results. The model-based feedforward loop detects the onset and magnitude of gust disturbances, which are generated upstream by a pitching airfoil, through a two-component X-wire located upstream of the DLR-F15 research airfoil. The combined controller proves to be effective for lift regulation during gust encounters, with feedforward rejecting large disturbances, and feedback attenuating high-frequency sensor noise and compensating for model uncertainty.
30 October 2020 in Communications Physics
Periodically forced, oscillatory fluid flows have been the focus of intense research for decades due to their richness as a nonlinear dynamical system and their relevance to applications in transportation, aeronautics, and energy conversion. Here we derive a mechanistic model of the dynamics of forced turbulent oscillator flows by leveraging a comprehensive experimental study of the turbulent wake behind a D-shaped body under periodic forcing. We confirm the role of resonant triadic interactions in the forced flow by studying the dominant components in the power spectra across multiple excitation frequencies and amplitudes. We then develop an extended Stuart-Landau model that captures the system dynamics and synchronization regions. Further, it is possible to identify the model coefficients from sparse measurement data.
29 July 2018 in International Journal of Heat and Mass Transfer
WCWilliams R. Calderón-Muñoz
Williams R. Calderón-Muñoz
1 October 2016 in Applied Thermal Engineering
31 December 2024 in Nonlinear Dynamics