9 March 2023 in Green Chemistry
Chemical recycling of polymers to monomers and chemicals is a promising pathway to valorize plastic waste that cannot be mechanically recycled, thus potentially minimizing resource consumption and the overall CO2 impact of the polymer industry. Among chemical recycling technologies, solvolytic depolymerization of poly(ethylene terephthalate) stands out as a selective process that maximizes monomer recovery. However, many challenges still remain regarding the optimization of these recycling technologies. Addressing these challenges could lead to these technologies becoming truly environmentally advantageous compared to alternative waste management solutions. Subcritical water has proven to be an outstanding media for a broad variety of reactions and its potential as a green solvent for PET depolymerization is reassessed based on a new nuclear magnetic resonance quantification method allowing for product characterization to a degree never reported before. In order to study the intrinsic product composition at every reaction condition (280 to 340 °C and 0 to 45 min reaction time), depolymerization experiments were performed in agitated micro-batch reactors, and NMR analysis was conducted prior to any alkaline-based purification. The highest recovery of terephthalic acid was achieved after 45 min at 340 °C, however, under these conditions ethylene glycol experiences a high degree of degradation. Collected data was then used to compare the environmental performance of different case scenarios leading to the preferable conditions to be 5 min at 310 °C, where the recovery of terephthalic acid, ethylene glycol, mono(2-hydroxyethyl) terephthalate and bis(2-hydroxyethyl) terephthalate is as high as 0.9 g g−1 PET.
25 June 2024 in Chemical Engineering Journal
27 March 2024 in Polymer Degradation and Stability
30 March 2026 in SSRN Electronic Journal
Chemical recycling of PET waste is a promising approach for the recovery of high-quality monomers that aims at improving the circularity of plastic production. Solvolysis technologies are being developed and include hydrolysis with acid/base catalysts or enzymes to promote depolymerization reactions into PET constituent monomers, terephthalic acid (TPA) and ethylene glycol (EG). However, the use of electricity, steam and organic solvents/chemicals has been identified as main factor affecting the economic and environmental performance of these technologies. This paper studies an alternative neutral hydrothermal process (nHTP), which involves hydrolysis at high temperatures and pressures without the use of catalysts, looking into the impact of water recycling and EG recovery in terms of costs and GHG emissions. The results reveal that recovering EG pays off the higher CAPEX and OPEX and yields a significant reduction in wastewater treatment costs, resulting in a TPA production cost of 1-1.4 EUR/kg and a carbon footprint of 1-1.7 kg CO2e/kg TPA. Although the process demands less electricity and steam compared to other hydrolysis technologies, fuel requirements for high temperature heat might limit its potential in the absence of sustainable heat options. Future studies are recommended to assess the utilization of lower-cost feedstocks (mixed waste and textiles), valorization of the solid by-product, and system integration possibilities to identify synergies between technologies in a broader chemical recycling context.