This article depicts the processing and mechanical characterization of a new class of multi-phase composites consisting of epoxy resin reinforced with jute fiber and filled with silicon carbide (SiC) particulates. The SiC used as filler material in this work was prepared from rice husk through plasma-processing technique. The effect of filler in modifying the physical and mechanical properties of jute—epoxy composites has been studied. It is found that the incorporation of rice husk derived SiC modifies the tensile, flexural, and inter-laminar shear strengths of the jute—epoxy composites. The micro-hardness and density of the composites are also greatly influenced by the content of these fillers.
1 April 2016 in Journal of Materials Research and Technology
Al-based metal matrix composites reinforced with different volume fraction of TiC particles as reinforcement was synthesized by the hot consolidation process. The titanium carbide used in this study was synthesized directly from the titanium ore (ilmenite, FeTiO3) by carbothermic reduction process through thermal plasma technique. The field emission scanning electron micrographs (FESEM) reveals the homogeneous distribution of TiC particles in the Al-matrix. Enhanced Young's modulus and mechanical properties with appreciable ductility were observed in the composite samples. The significant increases in the mechanical properties of the composites demonstrate the effectiveness of the low-density TiC reinforcement
1 January 2017 in Journal of Analytical and Applied Pyrolysis