1 September 2023 in APL Materials
The temperature tunability of complex dielectric constants of vanadium dioxide (VO2) makes it a promising phase-change material for use in active, dynamic, tunable photonics applications. Specifically, the semiconductor-to-metal phase transition in VO2 enables reversible, broadband, and large complex refractive index variation and paves the way for a plethora of applications. Although the critical temperature for phase-transition is 68 °C for VO2 films, its transition temperature can be reduced to room temperature by tungsten-doping of vanadium dioxide. Such a degree of freedom in controlling the critical temperature through tungsten doping provides further tunability of the thermochromic behavior. In this work, we investigate a variety of W-doped VO2 thin films deposited by laser ablation of targets with increasing W doping content and report detailed infrared characterization together with numerical simulations. Our experimental results indicate that the perfect absorption can be achieved at different temperatures, within the VO2 insulator-to-metal phase transition process, as a function of W doping content. Tunable subwavelength layers allow perfect absorption under different temperature conditions around λ = 12 µm. We show that a high dynamic range of reflectivity can be achieved when the temperature is increased above the phase transition temperature. Furthermore, we observe perfect absorption at 11.8 µm at room temperature for a W content of 0.75%. We believe that W-doped VO2 thin films with tunable and controllable perfect absorption will open the way for a class of promising thermo-optical devices including thermos-photovoltaics, infrared filters, radiative cooling devices, and thermal emitters.
27 December 2023 in Journal of Physics D: Applied Physics
In recent years, the excitation of surface phonon polaritons (SPhPs) in van der Waals materials received wide attention from the nanophotonics community. Alpha-phase Molybdenum trioxide (α-MoO3), a naturally occurring biaxial hyperbolic crystal, emerged as a promising polaritonic material due to its ability to support SPhPs for three orthogonal directions at different wavelength bands (range 10–20 μm). Here, we report on the fabrication, structural, morphological, and optical IR characterization of large-area (over 1 cm2 size) α-MoO3 polycrystalline film deposited on fused silica substrates by pulsed laser deposition. Due to the random grain distribution, the thin film does not display any optical anisotropy at normal incidence. However, the proposed fabrication method allows us to achieve a single α-phase, preserving the typical strong dispersion related to the phononic response of α-MoO3 flakes. Remarkable spectral properties of interest for IR photonics applications are reported. For instance, a polarization-tunable reflection peak at 1006 cm−1 with a dynamic range of ΔR = 0.3 and a resonance Q-factor as high as 53 is observed at 45° angle of incidence. Additionally, we report the fulfillment of an impedance matching condition with the SiO2 substrate leading to a polarization-independent almost perfect absorption condition (R < 0.01) at 972 cm−1 which is maintained for a broad angle of incidence. In this framework our findings appear extremely promising for the further development of mid-IR lithography-free, scalable films, for efficient and large-scale sensors, filters, thermal emitters, and label-free biochemical sensing devices operating in the free space, using far-field detection setups.
15 December 2025 in ACS Photonics
We present a novel scheme for highly efficient second-harmonic generation in the visible spectrum using minimal volumes of 3R-phase molybdenum disulfide (MoS2) integrated on a silicon nitride (Si3N4) ridge waveguide. The device is designed to operate near the C-exciton resonance of MoS2, where the material exhibits its strongest second-order nonlinear response. A periodic array of nanometric MoS2 stripes is patterned on the waveguide surface to form a one-dimensional photonic crystal, enabling strong field localization at the pump wavelength (λFF ≈ 890 nm) near the photonic band edge. This leads to resonant second-harmonic emission around 445 nm, close to the highly absorbing C-exciton. To mitigate the absorption while maintaining phase matching, we implement a counter-propagating pump configuration that ensures zero in-plane momentum mismatch and enables vertical out-coupling of the second harmonic signal via a leaky-mode resonance. The combination of strong nonlinear susceptibility, mode engineering, and resonant coupling allows for efficient frequency conversion within an interaction region only tens of nanometers thick, with an overall device footprint on the order of 1 μm2. Full-wave 3D simulations predict conversion efficiencies up to 0.004% at peak pump intensities of 300 MW/cm2. Moreover, the same architecture is compatible with spontaneous parametric down-conversion (SPDC), enabling integrated photon-pair generation with intrinsic modal and directional filtering. These features make the platform well-suited for compact, scalable nonlinear, and quantum photonic applications in the visible and near-infrared range.
14 March 2025 in Journal of Physics: Photonics
We investigate the mid-infrared thermo-optical properties of polycrystalline alpha-phase molybdenum trioxide (α-MoO3) thin films grown on fused silica substrates via pulsed laser deposition (PLD) at 500 °C. By analyzing temperature-dependent reflection spectra, we determine stable and uniquely defined MoO3 thermo-optical constants, dn/dT and dk/dT, over a 20 °C–250 °C temperature range. Unlike films grown using other deposition techniques at room temperature and subsequently annealed, our results demonstrate that PLD enables the fabrication of reliable and thermally stable MoO3 thin films, making them highly suitable for infrared applications, such as filters, polarizers, and sensors.
1 January 2024 in APL Materials
The phonon modes of materials contain critical information on the quality of the crystals. Phonon modes also offer a wide range of polarization-dependent resonances in infrared that can be tailored to applications that require large dielectric function contrast in different crystal directions. Here, we investigate the far-field characteristics of MOCVD-grown Ga2O3 thin films. With a combination of cross-polarization FTIR and AFM characterization techniques, we propose an easy and non-invasive route to distinguish κ and β phases of Ga2O3 and study the quality of these crystals. Using numerical methods and cross-polarization spectroscopy, the depolarization characteristics of β-Ga2O3 are examined and depolarization strength values as high as 0.495 and 0.76 are measured, respectively, for 400 and 800 nm-thick β-Ga2O3. The strong birefringence near optical phonon modes of an 800 nm β-Ga2O3 on a sapphire substrate is used to obtain several polarization states for the reflected light in the second atmospheric window 8–14 µm. We anticipate that our findings open a new path for material characterization and wave plate design for the mid-IR range and offer novel possibilities for the future of IR on-chip photonics, thanks to the compatibility of β-Ga2O3 with standard nanofabrication technology.
31 July 2026 in ACS Applied Optical Materials
Passive radiative cooling (RC) requires materials that combine high solar reflectance with strong long wavelength infrared (LWIR) emissivity in the 8–13 μm atmospheric window (AW). In this work, freestanding nanocomposite films were fabricated by embedding MPTMS-functionalized TiO2 nanoparticles (TiO2NPs–MPTMS) into a styrene–butadiene–styrene (SBS) triblock copolymer matrix. The resulting composites, referred to as NPs-SBS, were designed to be flexible, scalable, and cost-effective for potential RC applications. The SBS polymer provides emissive response in the 8–13 μm AW, whereas the inorganic component governs the solar reflection properties. Surface functionalization yielded Ti–O–Si linkages and a silica-like shell that enhances nanoparticle dispersion and stability while introducing additional vibrational modes in the LWIR range. Field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy characterization confirmed grain-like aggregates composed of nanoparticles with diameters ranging between 30 and 60 nm and verified the surface functionalization. To optimize RC performance, composites containing 1, 5, and 7 wt % of TiO2NPs–MPTMS were investigated. Fourier transform infrared spectroscopy and hemispherical optical measurements in the solar range (0.3–15 μm) revealed that all nanocomposites exhibited enhanced emissivity within the 8–13 μm atmospheric window (ε8–13 ≈ 0.63–0.65) compared to pristine SBS, while the solar absorptance remained relatively low, although it increased with nanoparticle loading. By combining the experimentally determined emissivity and solar-weighted absorptance within a simplified energy-balance model, the radiative cooling potential of the films was assessed. Among the investigated formulations, 1NPs-SBS and 5NPs-SBS exhibited the most favorable balance between LWIR emissivity and solar absorption, highlighting the importance of nanoparticle loading optimization for passive radiative cooling applications.