1 March 2022 in KSCE Journal of Civil Engineering
At present, most dust reduction methods do not consider the difference of dust particle diameter distribution along the tunnel and the applicability of droplet group under different parameters. In order to improve the dust reduction efficiency of each section, the particle size analyzer was used to analyze the dust samples of each section along the tunnel, and the migration law of dust of each particle diameter during the construction of Tunnel Boring Machine (TBM) was studied. The dust falling efficiency of droplets with different particle diameter under different sets of parameters was determined by the experimental platform built by ourselves. Research indicates: along the axis of tunnel, the farther away from the face of the tunnel, the higher the peak volume frequency of dust, and the distribution range of dust gradually narrowed to the direction of small particle diameter. The settling distance of dust with different particle diameter is quite different, and the content of small particle diameter dust shows an upward trend as a whole. The reduction efficiency of dust first increases and then decreases with the particle diameter, and there is particle diameter of the optimum dust reduction efficiency under the action of the same droplet group. The calculation formula of the air and water flow of the air-water nozzle and the particle diameter of the optimum dust reduction efficiency are put forward. This research can provide basis and guidance for multistage dust reduction and nozzle parameter setting in different sections of the tunnel.
1 January 2020 in Advances in Civil Engineering
With the excavation towards the intersecting tunnels’ direction, the impact on the surrounding rock stress between the two tunnels will gradually decrease, but how it decreased is not clear. At present, engineers often directly superimpose the stress in the triangular area of the crossing tunnel when calculating the stress in this area (single‐hole superposition theory). The theory is also used as the main theory to consider the surrounding rock stress for support which is difficult to explain the situation of nonuniform cross‐section centers not in the same plane. The safety level of support is mainly determined by construction experience which is unable to determine how to adjust the support level with the increase in the horizontal distance of intersecting tunnel, causing the insufficient utilization of materials. This paper derives theoretically the stress calculation of the triangular area of circular cross tunnels with different cross sections and analyzes the surrounding rock stress law of the intersecting tunnels triangular area from different cross‐section dimensions (the difference in diameter between the two tunnels is twice, 3 times, and 4 times) and different intersection angles. And the results show that, compared with the case of equal tunnel diameters, the stress influence area of the surrounding rock in the triangle area mainly expands to the side of the small section with the increase of the cross‐section difference of the intersecting tunnels; the dangerous area of the surrounding rock in the triangle area moves vertically to the small section; the safest condition is the two tunnels with 90° intersecting angle. The theoretical calculation model of this paper is verified by the previous research results.