9 September 2016 in Nanotechnology
There are a range of different methods to generate a nanostructured surface on silicon (Si) but the most cost effective and optically interesting is the metal assisted wet chemical etching (MACE) (Koynov et al 2006 Appl. Phys. Lett. 88 203107 ). MACE of Si is a controllable, room-temperature wet-chemical technique that uses a thin layer of metal to etch the surface of Si, leaving behind various nano- and micro-scale surface features or ‘black silicon’. MACE-fabricated nanowires (NWs) provide improved antireflection and light trapping functionality (Toor et al 2016 Nanoscale 8 15448–66 ) compared with the traditional ‘iso-texturing’ (Campbell and Green 1987 J. Appl. Phys. 62 243–9 ). The resulting lower reflection and improved light trapping can lead to higher short circuit currents in NW solar cells (Toor et al 2011 Appl. Phys. Lett. 99 103501 ). In addition, NW cells can have higher fill factors and voltages than traditionally processed cells, thus leading to increased solar cell efficiencies (Cabrera et al 2013 IEEE J. Photovolt. 3 102–7 ). MACE NW processing also has synergy with next generation Si solar cell designs, such as thin epitaxial-Si and passivated emitter rear contact (Toor et al 2016 Nanoscale 8 15448–66 ). While several companies have begun manufacturing black Si, and many more are researching these techniques, much of the work has not been published in traditional journals and is publicly available only through conference proceedings and patent publications, which makes learning the field challenging. There have been three specialized review articles published recently on certain aspects of MACE or black Si, but do not present a full review that would benefit the industry (Liu et al 2014 Energy Environ. Sci. 7 3223–63 ; Yusufoglu et al 2015 IEEE J. Photovolt. 5 320–8 ; Huang et al 2011 Adv. Mater. 23 285–308 ). In this feature article, we review the chemistry of MACE and explore how changing parameters in the wet etch process effects the resulting texture on the Si surface. Then we review efforts to increase the uniformity and reproducibility of the MACE process, which is critical for commercializing the black Si technology.
19 April 2018 in IEEE Journal of Photovoltaics
In this paper, we present the effect of installation parameters (tilt angle, height above ground, and albedo) on the bifacial gain and energy yield of three south-facing photovoltaic (PV) system configurations: a single module, a row of five modules, and five rows of five modules utilizing RADIANCE-based ray tracing model. We show that height and albedo have a direct impact on the performance of bifacial systems. However, the impact of the tilt angle is more complicated. Seasonal optimum tilt angles are dependent on parameters such as height, albedo, size of the system, weather conditions, and time of the year. For a single bifacial module installed in Albuquerque, NM, USA (35 °N) with a reasonable clearance (∼1 m) from the ground, the seasonal optimum tilt angle is lowest (∼5°) for the summer solstice and highest (∼65°) for the winter solstice. For larger systems, seasonal optimum tilt angles are usually higher and can be up to 20° greater than that for a single module system. Annual simulations also indicate that for larger fixed-tilt systems installed on a highly reflective ground (such as snow or a white roofing material with an albedo of ∼81%), the optimum tilt angle is higher than the optimum angle of the smaller size systems. We also show that modules in larger scale systems generate lower energy due to horizon blocking and large shadowing area cast by the modules on the ground. For albedo of 21%, the center module in a large array generates up to 7% less energy than a single bifacial module. To validate our model, we utilize measured data from Sandia National Laboratories’ fixed-tilt bifacial PV testbed and compare it with our simulations.
11 August 2016 in Nanoscale
Metal-assisted catalyzed etching (MACE) of silicon (Si) is a controllable, room-temperature wet-chemical technique that uses a thin layer of metal to etch the surface of Si, leaving behind various nano- and micro-scale surface features, including nanowires (NWs), that can be tuned to achieve various useful engineering goals, in particular with respect to Si solar cells. In this review, we introduce the science and technology of MACE from the literature, and provide an in-depth analysis of MACE to enhance Si solar cells, including the outlook for commercial applications of this technology.
15 November 2018 in Biomedical Optics Express
This feature issue contains a series of papers that report the most recent advances in the field of mid-infrared light sources used for medical applications, including tissue imaging, reconstruction, excision, and ablation. Many biomolecular compounds have strong resonances in the mid-infrared region and medicine is ideally suited to exploit this. The precision, sterility, and versatility of light in mid-infrared is opening more opportunities and this feature issue captures some of the most exciting.
13 November 2014 in Progress in Photovoltaics: Research and Applications