7 November 2024 in Journal of Physics D: Applied Physics
C4F7N/N2 and C4F7N/CO2 gas mixtures are considered potential alternative gases to SF6, and it is of particular significance to investigate the plasma decay process in these mixtures for evaluating their circuit breaker breaking performance. To comprehend the decay process of electron density(n e) in arc plasma within C4F7N/N2 and C4F7N/CO2 gas mixtures, an arc-generating circuit and a Thomson scattering experiment platform were established. Through coherent Thomson scattering diagnosis of gas arc plasma under various gas mixture conditions, a series of electron density results over time and space were obtained. The findings suggest that the initial electron density of the arc plasma diminishes with an increase in the proportion of C4F7N, and electron density decay is further accelerated as the proportion of C4F7N increases. Moreover, it was observed that the electron density decay rate is higher in the C4F7N/N2 mixture compared to the C4F7N/CO2 mixture. Notably, the electron decay rate in a 50% C4F7N/N2 mixture closely resembles that observed in pure SF6.
1 January 2022 in Physics of Plasmas
Magnetically confined cold-cathode plasmas in monatomic gases like helium can be used in a variety of devices and applications. In this paper, the radial distribution of electron temperature and electron density in cold-cathode helium plasmas constrained by an annular magnetic field were studied by optical emission spectroscopy. Helium plasma was generated under different pressures (7.5, 10, and 20 Pa) and values of current (23.5 and 33 mA). The spectral lines of He I 667.8 and He I 501.6 nm were studied and the Stark broadening method was applied to obtain the radial distributions of electron temperature and electron density. The results indicate that higher radial gradients or peak values of both electron density and electron temperature could be achieved with increasing operating pressures and discharge currents. It was found that the electrons were mainly concentrated in the area of the localized cusp magnetic field near the cathode surface and the electron density decreased rapidly as with the decrease in the magnetic field.
24 April 2025 in Journal of Physics D: Applied Physics
Vacuum switches are widely utilized in the medium-voltage switchgear field due to their rapid dielectric recovery characteristics and environmental friendliness. This study addresses the unclear mechanism by which anode spots affect cathode splashing erosion in vacuum arcs. Under fixed electrode distance conditions, we experimentally investigated the influence of anode spot jets on cathode splashing erosion and the relationship between cathode splashing erosion and post-arc anode temperature across various arc conditions. Two optical diagnostic methods were employed. The first method involved the visualization of metal droplets using high-power laser illumination combined with narrowband filters. The second method was a dual-wavelength approach to measure the temperature of the anode surface. The results indicate that the anode spot jet is a decisive factor in the formation of localized bright spots near the cathode, leading to significant cathode splashing erosion. In all arc conditions, cathode splashing erosion increased with the rise in peak post-arc anode temperatures and was closely related to the type of anode material. The study demonstrated that the energy density of evaporated atomic flux released from the anode is a key factor causing localized melting of the cathode and the generation of continuous metal droplets. Thus, we propose a hypothetical mechanism for the influence of anode spots on cathode splashing erosion: once anode spots form, evaporated atoms from the anode locally heat the cathode surface, resulting in localized melting, which interacts with cathode spots to produce continuous metal droplets.
3 March 2022 in Journal of Physics D: Applied Physics
Carbon dioxide (CO2) and its mixtures are potential alternatives as the arc quenching medium in switchgear. During the arc decaying phase after the arc current drops to zero, the arc plasma will deviate from the local thermally equilibrium (LTE) state and then the non-chemically equilibrium (non-CE) effect should be considered to predict the arc behavior. A non-CE numerical model was established to investigate the dynamic behavior of CO2 arc during the current zero (CZ) period. The time-dependent distributions of temperature, energy and electrical conductivity between the LTE and non-CE models were compared. The distributions of the species compositions and the non-equilibrium parameters were also investigated to further explain the mechanism of the non-CE effect. The non-CE particle transport is the main reason for the difference of temperature decay between non-CE and LTE calculations. The transport of all particles at the edge of the arc is dominantly influenced by the radial convection and diffusion, while the transport of atoms at the arc center is the combined results of convection, diffusion and chemical kinetics. As a contrast, the transports of electrons and ions are dominated by the chemical reactions. The decay of electron density at the nozzle throat calculated by the non-CE model are in good agreement with the laser Thomson scattering tests, while the LTE model failed to predict the electron density accurately, which proves that the non-CE effect of CO2 arc during CZ period cannot be ignored.
21 March 2024 in Journal of Physics D: Applied Physics
The SF6/N2 gas mixture mitigates the challenges associated with the use and liquefaction problems of pure SF6. It has great significance to analyze the decay characteristics of the plasma in it. Laser-induced plasma (LIP) and gas arc represent two distinct types of plasma, differing significantly in energy density and duration. This study utilized collective Thomson scattering diagnostics to investigate the temporal and spatial evolution of electron density of these two plasmas, with varying SF6/N2 mix ratios as the gas medium. Our findings indicate that initially, the electron density in gas arc is lower, and its decay rate is generally slower compared to LIP. However, as the SF6 concentration increases, the decay process accelerates for both LIP and gas arcs. It is worth noting that when the SF6 volume fraction exceeds 70%, the decay rate of electron density approaches that of pure SF6 in both plasma types, suggesting a saturation effect near a 70% SF6/N2 mix ratio in terms of electron density decay.
1 November 2024 in Journal of Physics D: Applied Physics
Direct current (DC) circuit breakers are essential for maintaining the stability of the electric energy transmission and safeguarding the power equipment from the damage caused by the fault currents in DC power systems. The characteristics of the switching arc can be utilized in DC forced current zero techniques. This paper investigates the influence of an external alternating current (AC) transverse magnetic field on the oscillation characteristics of air arc. By confining the arc between two insulating walls and applying a transverse AC magnetic field, the arc exhibits ‘bidirectional oscillation’ and ‘unidirectional oscillation’ modes. The effects of magnetic field amplitude and frequency on the air arc oscillation characteristics are analyzed through experiments, from the aspects of the arc voltages and arc motions. It can be found that an external AC magnetic field can stabilize the arc voltage at a specific oscillation frequency. By connecting an inductor–capacitor (LC) branch in parallel with the arc and setting the LC branch’s resonant frequency equal to the arc voltage oscillation frequency, a current resonance process between the arc and the LC branch can be achieved. This resonance facilitates the creation of the arc current zero-crossing point. A test platform based on the arc oscillation characteristics is established for current interruption experiments. For system currents of 1 kA and 3 kA, the arc current zero-crossing time is controlled within 0.41 ms after applying the external AC transverse magnetic field. The experimental results verify the rationality of the proposed DC breaking scheme.