27 September 2024 in Journal of Lightwave Technology
We propose and experimentally demonstrate, for the first time, the use of nonuniformly-spaced optical delay lines for microwave photonic discrete-time signal processing, leveraging the spatial diversity inherent in a multicore fiber (MCF). We present the design of a novel 32-core heterogeneous MCF with a tailored chromatic dispersion profile for each core to offer tunability over a 30-nm optical wavelength range, providing flexibility for eight specific microwave signal applications. As a proof of concept, we experimentally demonstrate a nonuniformly-spaced optical delay line based on a 5-km homogeneous MCF and variable delay lines. Our results show that the time delay offsets result in additional phase shifts, leading to an effective conversion to equivalent negative coefficients, all within a compact solution. Our experimental findings include the successful implementation of a bandpass filter with a flat frequency response of around 10 GHz using 5 and 7 taps/cores. Additionally, we present a fractional Hilbert transformer with variable ρπ phase shifts at 8 GHz, validated through the temporal Hilbert transform of a Gaussian pulse. Furthermore, we showcase a microwave pulse phase encoder for Barker and Quaternary Barker sequences, demonstrating accurate encoding of the input signal and a compression ratio consistent with theoretical predictions. Overall, we introduce a compact solution for microwave photonic applications that require negative coefficients. Our approach benefits from the ability of MCFs to provide parallel distributed signal processing with a reduction of size, weight, and power consumption.
28 January 2026 in Journal of Lightwave Technology
We propose and experimentally demonstrate a reconfigurable two-dimensional (2D) photonic beamformer architecture based on a dispersion-diversity heterogeneous multicore fiber (MCF) and fiber Bragg grating (FBG) arrays. The system employs two independent true-time-delay-line (TTDL) stages that enable 2D beamforming using a single tunable laser source. Continuous and discrete control of the azimuth and elevation angles, respectively, is achieved by combining wavelength-dependent beam-pointing angle periodicity with the dispersion diversity of the heterogeneous MCF. The distributed beamformer concept is validated for a 5 × 5 equivalent phased antenna array using 5-km heterogeneous MCF and an FBG array composed of seven gratings inscribed in each of five single-mode fibers. Each FBG was inscribed using a femtosecond laser at a specific longitudinal location and centered at a distinct wavelength within the 1530–1573 nm range. As a proof of concept, the system demonstrates continuous azimuthal steering over 90° and seven discrete elevation angles from −45° to +45°. Measurements of differential group delay and phase difference across all outputs show an average time-delay error below 0.5 ps with a maximum standard deviation of 1.03 ps, corresponding to a beam-pointing error under 2°. The retrieved array-factor patterns closely match theoretical predictions, confirming precise control in both azimuth and elevation. Overall, this work presents a compact, energy-efficient, and reconfigurable photonic architecture for 2D beamforming, offering a scalable, fiber-distributed solution for next-generation, beyond-5G, and 6G communication systems.