Patrick Breining

Patrick Breining

Auto-generated profile, based on publicly available information

Patrick Breining

Institute of Electrical Engineering, Karlsruhe Institute of Technology, Karlsruhe, Germany

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YLYingzhen Liu
Yingzhen Liu
Jing OuJing Ou
Jing Ou
MSMarkus Schiefer
Markus Schiefer
PBPatrick Breining
Patrick Breining
FGFrancesco Grilli
Francesco Grilli
MDMartin Doppelbauer
Martin Doppelbauer
The low core losses and high yield strength of amorphous materials are attractive properties for ultra-high-speed rotor applications. This paper proposes an innovative interior permanent-magnet synchronous rotor for ultra-high-speed motors, which takes full advantage of those properties and eliminates the need for sleeves. In order to study the feasibility of the proposed rotor, the electromagnetic properties of the amorphous core are first measured and the challenges for producing such rotors are subsequently discussed. Then, by using numerical methods, the electromagnetic, mechanical, and thermal performances of an example motor with an amorphous rotor core are evaluated and compared to those of a motor with a silicon steel rotor core. Through experimental characterization of the material and multiphysics numerical modeling of an example motor, it is shown that the amorphous material has great potential for producing high power density ultra-high-speed motors.

22 October 2020 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Jing OuJing Ou
Jing Ou
YLYingzhen Liu
Yingzhen Liu
PBPatrick Breining
Patrick Breining
Thomas GietzeltThomas Gietzelt
Thomas Gietzelt
TWTorsten Wunsch
Torsten Wunsch
MDMartin Doppelbauer
Martin Doppelbauer
Sleeves are frequently used for protecting high-speed rotors from high centrifugal forces at high speeds. Currently, metal sleeves such as titanium and inconel alloys and fiber sleeves such as carbon fiber and glass fiber are commonly used. Metal sleeves have high eddy current losses due to armature reaction. Fiber sleeves can avoid high eddy current losses. However, heat dissipation abilities of the rotors are decreased. Moreover, fiber sleeves are sensitive to temperature and manufacturing processes. Hence, sleeve-free interior permanent-magnet (IPM) rotor structure is attractive. To avoid sleeves, electrical steels of high mechanical strength and low core losses are required. Amorphous metal has been proved as a good candidate for such application. It can help to improve the power density and efficiency based on a study of a 15.7 kW, 125,000 rpm IPM demonstrator motor. However, because the mechanical strength of amorphous metal is easily degraded during core manufacturing, a high-silicon steel, 10JNEX900, is considered as an alternative. The electromagnetic and mechanical properties of 10JNEX900 are tested. A prototype made from amorphous metal 2605SA1 is tested to verify the simulation methods and it is used as a benchmark motor to study the feasibility of the new rotor core material.

31 July 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Jing OuJing Ou
Jing Ou
YLYingzhen Liu
Yingzhen Liu
PBPatrick Breining
Patrick Breining
MSMarkus Schiefer
Markus Schiefer
MDMartin Doppelbauer
Martin Doppelbauer
Amorphous magnetic materials (AMMs) have been commercially available for decades. However, their application to electrical machines still lacks of breakthrough progress. This article proposes to use the AMM for a high-speed interior permanent-magnet rotor to avoid sleeves. In this application, advantages of the high mechanical strength, the low core losses, and the relatively low-saturation flux density of the AMM are fully taken. In order to ensure the success of the proposed application, three important aspects: slotting, electromagnetic properties, and mechanical strength of the AMM are experimentally studied. Since the electromagnetic properties of the AMM core are sensitive to the mechanical process, stress, and temperature, the AMM cores are tested and the tested data are used for the motor design. Finally, a prototype is built and tested.

30 January 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
YLYingzhen Liu
Yingzhen Liu
MNMathias Noe
Mathias Noe
Jing OuJing Ou
Jing Ou
PBPatrick Breining
Patrick Breining
MVMarc Veigel
Marc Veigel
MDMartin Doppelbauer
Martin Doppelbauer
Compact, lightweight and large-scale generators are desired for offshore wind energy application due to transportation and installation requirements. In order to reduce the levelized cost of wind energy, ever-larger wind turbines are under research and superconducting wind generators are proposed as they have high power density and light weight. Due to the still high price of the superconductor, an iron core is usually employed to reduce consumption of the superconductor as well as to divert the flux direction away from superconductor. However, in many designs and studies, losses and permeability of the silicon lamination sheets used at cryogenic temperature are taken from the values at room temperature, which is not appropriate. Hence, the performance of the silicon lamination sheets at low temperature is essential. Magnetic properties tests of toroidal cores at both room temperature and 77 K with four different materials were made and the results show that the permeability of silicon sheets and losses are higher at 77 K than room temperature.

12 May 2020 in e+i Elektrotechnik und Informationstechnik
Verified
Journal Article
Open access
PDF file
CRChristoph Rollbühler
Christoph Rollbühler
PBPatrick Breining
Patrick Breining
JKJohannes Kolb
Johannes Kolb
MDMartin Doppelbauer
Martin Doppelbauer
Zusammenfassung: An elektrische Maschinen in elektrifizierten Automobilantrieben werden hohe technische Anforderungen gestellt. Zum einen werden Produktionsmethoden benötigt, welche die Herstellung großer Stückzahlen unter Einhaltung niedriger Kosten ermöglichen. Zum anderen wird eine hohe elektrische Reichweite gefordert, was einen elektrischen Antriebsstrang mit hoher Effizienz und gleichzeitig hoher Leistungsdichte voraussetzt. Grundlegend für die Entwicklung elektrischer Maschinen mit den genannten Eigenschaften sind detaillierte Verlustmodelle. Insbesondere die Modellierung der Ummagnetisierungsverluste, kurz Eisenverluste, im Stator und Rotor der Maschine ist dabei herausfordernd. Neben der Materialwahl und der Maschinengeometrie haben die Fertigungsprozesse einen nicht zu vernachlässigenden Einfluss auf die Verlustcharakteristik der Maschine. In diesem Beitrag wird ein neuer Ansatz zur Bestimmung der Eisenverluste eines einzelnen Statorzahns einer elektrischen Maschine unter Berücksichtigung realitätsnaher Flussbedingungen vorgestellt. Mit dem gezeigten Verfahren können Fertigungseinflüsse auf die Eisenverluste untersucht werden, wobei anwendungsspezifische Geometrie sowie magnetische Ausnutzung des Zahns beibehalten bleiben. Zunächst werden die magnetischen Zustände einer elektrischen Maschine mit Einzelzahnwicklung beschrieben. Nachfolgend wird der Einzelzahn-Prüfstand eingeführt und die Übertragung der relevanten magnetischen Größen der Maschine auf den Prüfstand vorgestellt. Die Bestimmung der Zahnverluste anhand von Messdaten wird gezeigt. Abschließend wird ein Vergleich von Simulation und Messung vorgenommen. Das vorgestellte Verfahren bietet die Möglichkeit, Eisenverlustmodelle an die zusätzlich auftretenden fertigungsbedingten Verluste anzupassen und die Unsicherheiten bei der Verlustmodellierung im Allgemeinen zu verringern.