24 September 2021 in IEEE Photonics Technology Letters
We propose a method to estimate the amplitude of an unexpected power loss which, leveraging on a calibration, enables the real-time monitoring of a network link. It is based on an existing fiber-longitudinal power profile evaluation technique. The reliability of the method is assessed experimentally. When the anomaly is located at 0 km from the beginning of the span, the estimation bias is smaller than 0.2 dB for losses up to 10 dB. When the anomaly is located at 25 km from the beginning of the span, the same estimation bias is observed but for losses up to 5 dB. In both cases, the standard deviation of the estimation is smaller than 0.2 dB.
30 April 2025 in Journal of Lightwave Technology
We present an accuracy comparison between two longitudinal power profile estimation methods, the minimum mean square error (MMSE) method and the deconvolution of the correlation-based method. We first numerically evaluate the accuracy of each method and benchmark the deconvolution method versus the MMSE with respect to span input power, number of spans and modulation format. For both methods, we obtain a similar accuracy – root-mean square error (RMSE) of 0.14 dB at 5 dBm – at a given input power. We also show that using 16-QAM or 64-QAM for the modulation format instead of QPSK allows the deconvolution method to be more accurate and robust with the number of spans. Secondly, we perform a first experimental demonstration of the deconvolution method and assess the accuracy of both methods with commercial transponders in an optical networking testbed. We measure the RMSE of both – MMSE and deconvoluted – profiles with respect to the optical time-domain reflectometer (OTDR). We obtain close RMSE values as the average RMSE difference between both profiles is below 0.28 dB for the lightpath excluding the first span.
12 June 2025 in Journal of Optical Communications and Networking
Soft failures in optical networks pose a significant challenge, as their detection and localization are notoriously difficult. This often leads to suboptimal mitigation strategies being implemented before the root cause is identified. To address this, the longitudinal power monitoring (LPM) technique has gained significant attention in recent years. LPM leverages information from the coherent receiver to compute the power evolution along the optical path. This paper presents an architecture that integrates the power profile information retrieved from the receiver with the SDN controller. The result is a self-healing optical network capable of locating soft failures in its lightpaths and providing finely tuned reconfigurations to solve them. By developing an OpenConfig-compliant YANG model, we implemented a gNMI streaming mechanism to transmit power profile metrics every 1.5 s from the receiver to the SDN controller. This process utilizes two SDN applications that combine the received data at the controller to finalize the power profile computation and pinpoint the location of soft failures. The architecture’s effectiveness is demonstrated through two scenarios. In the first scenario, the SDN controller accurately identifies and resolves attenuation caused by VOAs strategically placed along a span. In the second scenario, the controller jointly examines the power profiles of two lightpaths to locate a faulty WSS that is causing attenuation in only one of them.
15 July 2025 in Optical Switching and Networking