26 March 2024 in The Journal of Almaty Technological University
In pigment printing, a pressing issue is the search for new binders for printing inks. The work examines the search for accessible and cheap polymer preparations that have cross-linking properties and are capable of forming strong, elastic and transparent films to create an effective low-component and environmentally friendly pigment printing technology. The use of polyurethane dispersions in various proportions with additional cross-linking agents has been studied. They used methazine, carbamol GL, and PVA. For the Aquapol - Methazine mixture, it is necessary to use the ratio with the lowest content of thermosetting resin precondensates. When using PVA, the optimal ratio is 1:1. When adding Aquapol 12, the color fastness to dry rubbing and washing is 5 points. PVA increases the adhesion of the print to the fabric. In the case of PVA, the fingerboard is softer. With increasing concentration of PVA in the composition, the hardness either does not change or decreases. After modification of polyurethane dispersions with PVA, its use is economically beneficial.
14 September 2023 in The Journal of Almaty Technological University
The article considers the improvement of methods for testing the color fastness of textile materials with the replacement of the visual method with an objective colorimetric evaluation method. A new method for testing the color fastness of textile materials is proposed. The analysis of domestic and foreign standards that establish the calculation and establishment of color fastness standards for cotton fabrics and their comparison with the norms of international and domestic standards was carried out. It is shown that the development of methods for instrumental determination of color fastness to friction, which is an alternative to the method of visual assessment of the color fastness of any textile material on a gray scale, is currently an urgent and promising scientific and technical task. A new method for testing the color fastness of textile materials is proposed. The overall color difference (ΔE) between the test sample of the color fastness test material and the original sample was measured. For both samples, the over-all color difference was determined in the CIEL*a*b* system, the values of which are converted into equivalent points on a gray scale. The score in terms of the value of ΔE was calculated on a computer using the Ecsel environment and displaying the calculation results on the display screen.
3 July 2023 in The Journal of Almaty Technological University
It is known that the dyeing process used in laboratory conditions does not allow taking into account the influence of such parameters as the flow rate of the dye solution, the density when placing the dyed fibers, etc. In this regard, the article considers the use of a plant for dyeing textile materials, including dyeing fibers weighing 1-10 grams. In this regard, the article considers the use of a plant for dyeing textile materials, including dyeing fibers weighing 1-10 grams. The influence of the speed of movement of the dyeing system in the range of 1.1 to 1.8 m/min and the weight of the fiber in the dyeing volume in the range of 27.7-125 kg/m3 on the absorption of dyes from the dye bath was studied. When changing the speed of the flow of the dyeing system in the range of 1.1-1.43 m/min, an increase in the content of the dye on the fiber and an increase in the brightness of the color in the range of 37.5-48.9 are observed. It should be noted that with an increase in the flow rate of the dyeing system over 1.43 m/min, the amount of dye on the fiber decreases the brightness to 41.6. This can be judged from the results of measuring the brightness of the color and the coefficient of unevenness, which amounted to 11.24%. The use of the considered installation for dyeing textile materials in the conditions of dyeing shops of the finishing production of the textile industry will allow you to quickly introduce new dyeing recipes and significantly reduce the time for their practical implementation.
30 September 2026 in Mechanics and Technologies
Бұл мақалада Қазақстан Республикасының әскери қызметшілерге арналған киім сапасының қолайлылығын арттыру мақсатында конструкциялаудың кейбір элементтерін қоса алғанда, эргономикалық және экологиялық көрсеткіштерді жақсарту жөнінде зерттеулер жүргізілді. Қазіргі заманғы отандық әскери киімдерге қойылатын талаптарды жүйелендіре отырып, сапасы мен қолайлылығы бойынша сауалнама жүргізілді, жобалау процесінің теориялық негіздемесі көзделген. Сапалы ыңғайлы әскери киім, әскери қызметшілердің қорғанысы мен жайлылығының жоғары деңгейін қамтамасыз ете отырып, әскери операциялардың тиімділігін арттыруда негізгі рөл атқаратынына мүмкундік береді. Жетілдіру осы саладағы процестер мен әзірлемелерді дамытуға, қарулы күштердің жауынгерлік әзірлігін одан әрі жақсартуға ықпал ететін болады. Зерттеу нәтижесінде қолайсыздық проблемаларын шешу және әскери киім конструкцияларын жақсарту үшін бірнеше тиімді компоненттер ұсынылды. Бұдан басқа, әскери қызметшілер үшін арнайы киімді пайдалануды жеңілдететін қосымша элементтер қосуға ұсынылады.