13 July 2021 in Materials Science Forum
Sorption resistances of environmentally friendly polymeric materials in different liquid mediums are studying in this work. As part of environmentally friendly polymeric materials based on polylactide, OK compost HOME plastic and coffee grounds sorption studying in different liquid mediums, the most stable compositions were identified in terms of size stability and diffusion coefficient. microscopic analysis of new environmentally friendly polymeric materials before and after exposure in operating liquid mediums was made and compositions with the least surface changes were determined.
31 December 2022 in Eastern-European Journal of Enterprise Technologies
The object of research is the process of chemical transesterification of palm olein with increased oxidation indicators in the presence of potassium glyceroxide catalyst. Transesterification is an important method of fat modification. The use of fats with increased oxidation indicators leads to the deactivation of common catalysts and a decrease in the efficiency of the process. There is a need to increase the dosage of catalysts, increase the process temperature, which negatively affects the product quality. An alternative transesterification catalyst (potassium glyceroxide) was used for the transesterification of palm olein with increased oxidation indicators. Palm olein (CAS Number 93334-39-5) with standard indicators was used: melting point 22.4 °C, peroxide value 0.8 ½ O mmol/kg, anisidine value 0.3 c. u. Olein was subjected to heating at a temperature of 90 °C in order to increase oxidation indicators, after which it underwent transesterification. The difference in melting points of the initial and transesterified palm olein was used as a parameter of process efficiency. The maximum limit values of the oxidation indicators at which the process is effective are: peroxide value 12.7 ½ O mmol/kg, anisidine value 10.4 c. u. The difference in melting points is 12.1 °C, which indicates the efficiency of the process. The qualitative indicators of the obtained transesterified fat indicate compliance with DSTU 4336 (CAS Number 97593-46-9): melting point 34.5 °C, peroxide value 1.2 ½ O mmol/kg, anisidine value 1.0 c. u. The results of the research make it possible to use fat with increased oxidation indicators without pretreatment and predict the efficiency of transesterification depending on the fat indicators. This will increase profitability and reduce production waste.
29 April 2023 in Eastern-European Journal of Enterprise Technologies
The paper considers the way to solve the problem of processing waste from the oil and fat industry, namely sunflower and soybean meals, which are a source of many valuable substances. The peculiarity of the work lies in determining the rational ratio of the base components of extruded animal feed, which is an important aspect of obtaining high-quality competitive products. The research object is the use of oil and fat industry waste in extruded animal feed technology. The rational ratio of the components of extruded animal feed has been determined. The rational ratio of animal feed components is: sunflower meal – 0.40 parts by weight; soybean meal – 0.25 parts by weight; oatmeal – 0.35 parts by weight. The animal feed sample with justified composition corresponds to the commercial analogue in terms of porosity (72 % and 76 %, respectively) and cost ($285/t and $285/t, respectively). In addition, the extruded feed with the developed composition exceeds the commercial analogue in terms of protein content by 3.2 times and essential amino acids content by 2.9 times. The obtained data are explained by the use of a complex of components, namely oil and fat waste and starch-containing grain raw materials with various limiting amino acids and various technological features of the extruded mass of their mixture. The feature of the obtained results is the possibility to control the technological characteristic (porosity) of the finished product depending on the components ratio, which allows changing product characteristics according to consumer requirements. The research results make it possible to efficiently process secondary products of oilseed processing into a new competitive marketable product. From a practical point of view, the technology makes it possible to reduce the cost of storage/utilization of industry waste, get additional income from new products sales and improve environmental conditions. The applied aspect of using the scientific result is the possibility to create a range of animal feed with different technological indicators depending on the components ratio.
28 June 2024 in Eastern-European Journal of Enterprise Technologies
The object of the study is the content of antioxidants and the induction period of accelerated oxidation under simulated conditions of the lipid component of the emulsion system. The way to solve the problem of developing compositions of oxidation-stable emulsion systems based on nutritionally valuable oils, in particular hemp oil, by adding natural physiologically active antioxidants is considered. The research is relevant in the context of finding effective storage methods and extending the shelf life of products using hemp oil. The feature of the work lies in determining the influence of the composition of emulsion systems based on hemp oil on chemical oxidation during storage. The content of stabilizers in the hemp oil emulsion system (lecithin – 0.8...1.0 %; xanthan gum – 0.0...0.1 %) is proposed, which is effective in the inhibition of oxidative spoilage. The content range of β-carotene (0.012 %) in model emulsion systems is outlined, the addition of which increases the induction period of accelerated lipid oxidation by 1.58...2.08 times. The peroxide value of the lipid component of the emulsion system during storage at different temperature conditions (0...15 °C) and during different storage periods (15...60 days) was studied. The results of the study confirm the significant influence of the composition of emulsion systems on the chemical oxidation of the lipid component, which is important for ensuring the quality and stability of food, pharmaceutical and cosmetic products. An applied aspect of the obtained scientific result is the possibility of modeling the composition of emulsion systems based on valuable hemp oil depending on the ratio of polyfunctional antioxidants of the oil component
17 June 2025 in Eastern-European Journal of Enterprise Technologies
The object of the study is the composition of the feed extrudate modified by the addition of dietary fiber and lipid sources. The problem to be solved is the optimization of the structural and mechanical properties of the feed extrudate through the rationalization of the addition of components. Regression models have been developed to accurately predict the ratio of modifying additives that provides the specified water resistance and swelling index. It has been experimentally established that the rational ratio of components – 4.0±0.1 % chicken fat and 6.0±0.2 % wheat bran – provides water resistance of 190.0±7.5 min, swelling index of 55.0±2.1 % and porosity of 60.0±2.2 %. The results are achieved due to the complex interaction between the components, where lipids form a hydrophobic barrier, and dietary fibers create a stable porous matrix, which is confirmed by regression models. Comparative analysis with a commercial analogue (“Roycher™ AQUA Carp Finish”) revealed competitive advantages of the developed extrudate: lower cost (310 USD/t versus 1050 USD/t). Structural and mechanical characteristics of the studied extrudates were similar. This makes the developed composition promising for industrial application. The results obtained are explained by the interaction of the protein-starch matrix with lipids and dietary fibers during extrusion, which is confirmed by statistically significant models. A distinctive feature of the study is a comprehensive approach to rationalizing the composition of the extrudate, which combines technological efficiency with economic feasibility. The extrudate of the developed composition can be used in the production of feed for aquaculture. Further research should be aimed at studying the long-term stability of product properties and adapting the technology to industrial conditions
30 December 2024 in Eastern-European Journal of Enterprise Technologies
The object of the study is an emulsion system containing emulsifiers (Emulgin B2, Lanett SX), wetting agents (propylene glycol, glyceryl cocoate) and sodium laureth sulfate as a foaming agent. The main problem solved in the study is to ensure rational technological properties of emulsion systems in aerosol form under variable storage and use conditions. The results obtained showed that to ensure maximum emulsion stability during 7 and 30 days of storage, the optimal concentrations of Emulgin B2 are 2.75…3.0 %, and Lanett SX is 2.0…2.5 %. To achieve the desired foaming ability (80…85 %) and foam stability (75…80 %), it is recommended to use sodium laureth sulfate at a concentration of 0.20…0.22 %. It was found that the wetting agents – propylene glycol (7 %) and glyceryl cocoate (1.5 %) – provide optimal system viscosity within 35…40 mPa·s. The stability of the emulsion is ensured by the formation of strong interfacial films using Lanett SX, while Emulgin B2 improves the thermal stability of the system. Foaming properties are provided by the ability of sodium laureth sulfate to reduce interfacial tension, however, too high concentrations can lead to foam oversaturation and deterioration of its stability. The features of the obtained results are that specific concentration limits of the components are justified, at which the necessary stability and functionality of the emulsion system are ensured. This allows solving the problem of achieving optimal characteristics of the emulsion system during storage and use, ensuring comfortable application to the skin and a stable foam structure. The scope of application of the obtained results is the cosmetic industry