1 January 2019 in Applied Thermal Engineering
11 August 2015 in IEEE Transactions on Dielectrics and Electrical Insulation
Theoretical analysis for the volume (V) effect on electric breakdown strength (EBD) and the operating field (Eop) effect on lifetime (NL) of solid dielectrics on a nanosecond time scale is presented in the perspective of the Weibull distribution. It is derived that the general formula for the volume effect is EBD=kV-1/m and the formula for the lifetime effect is NL=(EBD/Eop)m, where m is a parameter which is determined by the dielectric quality and influenced by the dielectric types. Besides that, it is found that the volume effect and the lifetime effect correlate with each other via m. By summarizing the experimental results, it is concluded that m is averaged to be 8 for polymers with a normal quality under short pulses and that m will be larger (or smaller) than 8 when polymers are with better (or poor) quality. It is suggested that m can be defined as a parameter to describe the dielectric's quality and m of 8 can be regarded as a criterion to choose polymers as insulation materials.
1 December 2018 in Annals of Nuclear Energy
12 August 2013 in Journal of Applied Physics
On a nanosecond time scale, solid insulators abnormally fail in bulk rather than on surface, which is termed as the “worm-hole” effect. By using a generator with adjustable output pulse width and dozens of organic glass (PMMA) and polystyrene (PS) samples, experiments to verify this effect are conducted. The results show that under short pulses of 10 ns, all the samples fail due to bulk breakdown, whereas when the pulse width is tuned to a long pulse of 7 μs, the samples fail as a result of surface flashover. The experimental results are interpreted by analyzing the conditions for the bulk breakdown and the surface flashover. It is found that under short pulses, the flashover threshold would be as high as the bulk breakdown strength (EBD) and the flashover time delay (td) would be longer than the pulse width (τ), both of which make the dielectrics' cumulative breakdown occur easily; whereas under long pulses, that Ef is much lower than EBD and td is smaller than τ is advantageous to the occurrence of the surface flashover. In addition, a general principle on solid insulation design under short pulse condition is proposed based on the experimental results and the theoretical analysis.
1 January 2019 in Fusion Engineering and Design
8 November 2020 in International Journal of Energy Research