Amongst the byproducts of steel industry is ladle furnace slag (LFS), with a chemical composition similar to limes, especially in the high content of calcium oxide and hydroxides. Its binding potential is improved with finer texture, making it viable for use as a supplementary cementitious material (SCM). Therefore, this study investigated the effects of a total replacement of hydrated lime (HL) for LFS in masonry mortars, also exploring whether pozzolanic addition of metakaolin (MK) could enhance it, tested both at 28 and 180 days. The experimental results, obtained at 28 and 180 days, showed that the replacing HL for LFS improved the mechanical properties of the mortars, due to the greater amount of compounds of LFS also present in the OPC, but not in the HL, such as Fe2O3, Al2O3 and SiO2. These findings suggest the potential of LFS for application in masonry mortar promoting strategies of circular economy.
Ladle furnace slag (LFS) is a byproduct from steel refining with high calcium oxides and hydroxides contents, making it viable as a supplementary cementitious material (SCM), enhancing microstructure and mechanical properties, particularly in mortars. Therefore, this work evaluated the replacement of 30% of ordinary Portland cement (OPC) with LFS in coating mortars, combined with a water-retaining admixture as well as the pozzolanic addition of Metakaolin (MK). The mortars followed a 1:6 (binder:aggregate) ratio, and the tests evaluated their properties in the fresh and hardened state, such as the water retention and mechanical properties, along with microstructure characterization to investigate the effects of the binder blends. At 28 days, LFS incorporation ensured water retention, less compacted matrix and greater capacity of deformation absorption, which are properties particularly beneficial for masonry mortars. MK’s pozzolanic reactions resulted in pore refinement; however, the improvements in nominal strength were not statistically significant.
5 September 2026 in Construction and Building Materials