29 July 2026 in Bulletin of Shakarim University. Technical Sciences
This paper presents a comprehensive mathematical modeling study of the effect of an antireflection coating on the optical characteristics and performance of a silicon solar cell. The analysis is based on the Fresnel equations and the thin-film interference model, which are used to evaluate the spectral dependence of the reflection and absorption coefficients of solar radiation in the wavelength range of 400-1100 nm. Particular attention is given to the interaction of incident light with the silicon surface and the role of optical losses in limiting device efficiency. The results demonstrate that the application of an anti-reflection coating based on silicon nitride (Si₃N₄) leads to a significant reduction in surface reflectance and a corresponding increase in the absorption of incident solar radiation. A detailed modeling study of the dependence of the reflection coefficient on the coating thickness was carried out, allowing the determination of the optimal thickness of the anti-reflection layer under standard illumination conditions. The obtained results are consistent with theoretical predictions and reported experimental data. In addition, the influence of optical losses on the overall photovoltaic performance was evaluated by considering the spectral distribution of solar irradiance and its contribution to photocurrent generation. It was shown that reducing reflection losses directly contributes to an increase in photocurrent and an improvement in the efficiency of photovoltaic energy conversion. The proposed modeling approach provides a useful framework for the design and optimization of thin-film coatings in modern high-efficiency silicon solar cells and can be extended to other photovoltaic materials and multilayer coating systems.
1 August 2025 in Bulletin of Electrical Engineering and Informatics
The purpose of this study is to analyse the technical, economic, and environmental aspects of direct current electricity transport and to assess its potential in accordance with modern requirements for sustainable energy and infrastructure. The methods used include analytical method, classification, functional method, statistical method, synthesis. The study revealed that the use of direct current has the potential to increase the capacity of power transmission lines, which is especially important in a dynamically developing industrial sector. It should be noted that direct current networks have no phase shifts and no notions of static and dynamic stability, making them ideal for long-distance power transmission. As a result of the conducted research, it can be concluded that the use of direct current in technologies can increase the efficiency and reliability of energy systems, especially with an increase in consumption and load on the grid. Direct current power transmission technologies meet the requirements of sustainable energy supply, providing economic efficiency and reducing environmental impact.
30 March 2026 in Bulletin of the National Engineering Academy of the Republic of Kazakhstan
The article considers the possibility of providing energy supply to the village of Rodina, located in the Akmola region of Kazakhstan, through the integration of renewable energy sources (RES) – solar and wind generation – with energy storage systems (lithium-ion batteries and electrochemical supercapacitors). An annual simulation was carried out with hourly increments, which allows taking into account the load of the village facilities: a dairy, sports facilities (swimming pool, hockey palace), schools, kindergartens, as well as the household sector. Tables of monthly load distribution, graphs of generation profile, storage charge level and uncovered load are presented. Technical and economic calculations (CAPEX and OPEX) were performed in tenge (KZT) and US dollars (USD). The results show that the optimal configuration of the hybrid system provides 100% coverage of the annual load with minimal shortage hours.
23 March 2023 in Polityka Energetyczna – Energy Policy Journal
The relevance of this study is due to the fact that the presented object of scientific work, namely 6–10 kV overhead lines, plays an important role in the process of providing electrical energy to consumers of the oil industry. The aim of the work is a detailed analysis of the reliability of...
15 December 2024 in Neft i Gaz
SUS.Seifullin Kazakh Agrotechnical Research University
S.Seifullin Kazakh Agrotechnical Research University
SGS. Utebaev Atyrau University of Oil and Gas
S. Utebaev Atyrau University of Oil and Gas
The problem of stability of electrical engineering systems (EЕS) is relevant for enterprises of continuous oil and gas production, sensitive even to short-term power supply disruptions, which are caused and inevitable by emergency disturbances, which is defined as dynamic stability. The EЕS of oil and gas facilities, which contain a motor load in the form of synchronous and asynchronous electric motors, complicates the emergency situation in case of loss of stability. This requires defining the boundary of dynamic stability and the parameters characterizing dynamic stability in the form of mathematical models. The analysis of the reliability of the EЕS showed a problem for most objects of oil and gas complexes (ОGC) in the form of external and internal disturbances, leading in some cases to a complete stop or partial collapse of the technological process, due to low dynamic stability, which requires constant maintenance of set voltage levels at the control points of the EЕS and ensuring the necessary balance of reactive power. The article provides information about one of the complex post-accident processes, such as the dynamic stability of electrical systems, violations of which can lead to significant direct and indirect losses, defines the boundaries of static and dynamic stability, proposes mathematical models that determine a dynamically stable EЕS and provides means to increase the dynamic stability of EЕS. As a result of the analysis of the reliability of the EЕS, the numerical integration of differential equations describing the behavior of the EЕS in the form of mathematical models is presented, which shows the parameters that allow to increase the dynamic stability of the EЕS ОGС.