Anna Liashenko

Anna Liashenko

Auto-generated profile, based on publicly available information

Anna Liashenko

National University “Yuri Kondratyuk Poltava Polytechnic

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2022
Verified
Book
Closed access
AYAngela Yelchenko-Lobovska
Angela Yelchenko-Lobovska
ILIvan Lavryk
Ivan Lavryk
ALAnna Liashenko
Anna Liashenko
LPLarysa Pedchenko
Larysa Pedchenko
MPMykhailo Pedchenko
Mykhailo Pedchenko
Today considerable experience in the development of tar sands is accumulated. However, well-known mining technologies do not cover the entire depth range of natural bitumen deposits. In addition, there are significant energy-intensive technol 309 ogies and negative environmental impacts. In view of this, the purpose of this work is to improve the method of extracting natural bitumen in site for a deposit interval of 75-200 m and to substantiate the basic technological scheme of this method. The proposed method of extracting bitumen from poorly cemented reservoirs in the depth range of 50 – 400 m provides: creation of artificial production; the transfer of the rock into the water mixture composition under the action of high pressure jets of a heated mixture of water, a hydrocarbon solvent and a flotation agent; separation from the rock and concentration of bitumen in the production as a result of its heating, dissolution and flotation; selection of depleted bitum slurry from the production by gas lift. The proposed method of extracting bitumen is the transfer of the rock at the its occurrence site to the suspension condition on the excavation created by the hydraulic production method, separation and concentration of bitumen by dissolving it with a heated hydrocarbon solvent and a flotation agent (hydrocarbon reagents) and extraction in composition of the depleted rock slurry to the surface by the gas lift method. As the preliminary calculations show, the proposed method will allow the efficient extraction of bitumen and highly viscous oil from weakly cemented reservoirs in the depth range of 50-400 m. Also, the proposed technology creates the preconditions for the development of oil sands at a depth of 75-200 m since there is currently no effective technology for the interval. In addition, it can significantly reduce energy costs, environmental pollution and greenhouse gas emissions.

9 June 2025 in Technology audit and production reserves
Verified
Journal Article
Open access
PDF file
OMOlena Martus
Olena Martus
BCBranimir Cvetkovic
Branimir Cvetkovic
OMOlena Mykhailovska
Olena Mykhailovska
AYAndrii Yaholnyk
Andrii Yaholnyk
ALAnna Liashenko
Anna Liashenko
The object of research is the process of oil displacement during waterflooding. The research aims to develop and substantiate a methodology that improves the reliability of predicting oil displacement efficiency during waterflooding. For this purpose, the classical Buckley-Leverett method and the State Standard of Ukraine method for calculating the oil displacement efficiency during waterflooding were extended by integrating lithological data, which allows considering the influence of geological characteristics on the process of oil displacement by water. The developed methodology for improving the reliability of oil displacement efficiency prediction encompasses the identification of lithofacies and the determination of core and fluid sample properties. Subsequently, the representative elementary volume (REV) is ascertained for each facies. Based on this, the irreducible water saturation and irreducible oil saturation are calculated. Relative permeability curves are then constructed for each facies. The Buckley-Leverett equation is applied, and fractional flow curves are generated. The data is integrated into a three-dimensional reservoir model, with facies volumes determined using the kriging method. Finally, the averaged oil displacement efficiency is calculated. A comparative analysis of the reliability of methods, with and without lithological subdivision, was conducted by constructing an experimental histogram and a normal distribution plot, considering or disregarding lithological distribution, respectively. For the comparative analysis, this research generates one hundred reservoir realizations, both with and without lithological subdivision, using the Sequential Indicator Simulation tool. It was established that the use of lithological data in the calculations of the Buckley-Leverett method, with consideration of the lithological factor, allows a reduction in the scatter of predicted values by 11% in comparison with a similar method without consideration of the lithological factor. The originality of the research lies in integrating lithological distribution into the Buckley-Leverett method and the State Standard of Ukraine method of calculating the oil displacement efficiency during waterflooding, which significantly improves the predictive results. The proposed approach allows considering the lithological factor at the level of analytical formulas when calculating the two methods.

16 December 2020 in Modern Economics
Verified
Journal Article
Open access
KSK. Sokoliuk
K. Sokoliuk
UUUniversity of the State Fiscal Service of Ukraine
University of the State Fiscal Service of Ukraine
ALA. Lyashenko
A. Lyashenko
Annotation. Introduction. The article examines the services of logistic outsourcing from the point of view of Ukrainian manufacturing companies, analyzes the results of the survey, compares them with global trends. It was determined that Ukrainian companies use logistic outsourcing less often than companies in other regions of the world. Also, the most often outsourced fields were identified. Purpose. Analysis of logistics outsourcing services from the viewpoint of Ukrainian manufacturing companies and comparison of survey results based on the survey with global trends. Results. It was found that from the list of enterprise groups classification (micro, small, medium, large) all categories use the services of freight forwarding companies. The following types of logistic processes are most often outsourced: transportation, lease and maintenance of equipment, warehousing, logistic chain optimization. It was found that among other countries in the study of third-party logistics, Ukraine occupies the lowest position in the usage of outsourcing services in logistics. The reasons for outsourcing logistic processes in logistics are significant: lack of own resources and capacity, cost reduction. The relationship between causes and logistic processes has shown that in order to reduce logistic costs in the enterprise it is necessary to outsource transportation. Conclusions. Statistical research has shown a small relationship between the areas of logistic outsourcing and the main causes of outsourcing of logistic activities. Therefore, it is not appropriate to say that some logistical measures should be outsourced and others should not. The mixed system, which combines the usage of own and third-party production facilities, is the most suitable for most Ukrainian manufacturing companies Keywords: logistics, outsourcing, third-party logistics, transport, warehousing, supply chain management, optimization, respondent, survey.

14 June 2020
Verified
Book Chapter
Closed access
PDF file
VMValeriy Makarenko
Valeriy Makarenko
YVYuriy Vynnykov
Yuriy Vynnykov
ALAnna Liashenko
Anna Liashenko
OPOleksandr Petrash
Oleksandr Petrash

21 December 2023 in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
Verified
Journal Article
Open access
PDF file
YVYuriy Vynnykov
Yuriy Vynnykov
ABAndrii Bondar
Andrii Bondar
ALAnna Liashenko
Anna Liashenko
VNValeriy Novokhatniy
Valeriy Novokhatniy
МRМaryna Rybalko
Мaryna Rybalko
The advantages of express methods of penetration and probing for evaluating the mechanical parameters of cohesive sedimentary rocks over traditional methods of testing them in single-plane displacement devices, odometers, and stabilometers are analyzed, such as: complete independence from the applied force and cone immersion depth; simplicity and reliability of the equipment; high reliability of results, etc. The methodology and results of 185 sets of penetration-shear tests of various clay rocks, from sandy loams to clays, are presented. Their results were used to determine the strength indicators of cohesive rocks (angle of internal friction and specific adhesion). Through statistical processing of experimental data, it was confirmed that for the water-saturated state of clay rocks there is an almost functional relationship between the penetration index and the porosity coefficient.