7 October 2022 in Smart Materials and Structures
For connection status monitoring of bolted joint groups, a novel method with fiber Bragg grating (FBG)-based curvature sensor is proposed. An FBG curvature sensor with an inextensible elastic matrix and an offset grating is adopted and clamped between a fixed support and the monitored bolt in a plane bending status. Based on the shape deformation of the FBG curvature sensor induced by the bolt loosening, the bending curvature change of the elastic matrix is measured by the FBG. By detecting the wavelength shift of the FBG induced by the matrix curvature variation, the relationship between the bolt loosening angle and the wavelength shift of FBG can be obtained, and hence the bolt connection status can be determined by the wavelength shift of FBG. Details of the proposed method are presented, and a surface-bonded FBG curvature sensor is designed, fabricated, and experimentally studied to verify the proposed method, and the parameters on sensing performance are also investigated. Experimental results show that the proposed method can monitor bolt loosening angle with high sensitivity and linear output by adjusting the parameters of the FBG curvature sensor. The looseness angle resolution of the proposed sensor can reach 0.0767°. This paper presents the first attempt to monitor bolt loosening angle using an FBG curvature sensor. With the advantages of high sensitivity and resolution, strong applicability, convenience and reusability for the maintenance of bolts, and ease of forming quasi-distributed sensor networks, the proposed method is able to provide a general solution for the on-line monitoring of bolt connection status for large-span distributed bolted-joint groups.
25 October 2022 in IEEE Sensors Journal
Bolt joints are widely used in large-span truss and bridge structures. The integrity of bolt joint is paramount to the safety of the structure. For distributed multiple bolt joints in large-span structures, a multiplexed angle sensor based on fiber Bragg grating (FBG) for bolt loosening monitoring is proposed. Two FBGs characterized by different wavelength values are symmetrically arranged inside the specially-designed sensor structure for the measurement of the bolt loosening angle in terms of their wavelength shift difference. The detail structure design of the FBG angle sensor with temperature self-compensation, automatic reset, and simple reuse is presented. The theoretical and numerical analyses are adopted to derive the measurement principle and optimize the structure of the sensor. Experimental results show that the measuring sensitivity of the FBG angle sensor prototype is about 109.6 pm/° with excellent linearity in the measuring range from 0° to 20°, and the maximum resolution of the bolt loosening angle obtained is 0.38°. The proposed sensor has stable static characteristics and can be expediently reused and developed into a quasi-distributed sensing network, which offers a new approach to real-time quantitative bolt loosening monitoring for distributed bolt joints.
4 December 2024 in IEEE Sensors Journal
For looseness detection of bolted joins in large structures with a wide distribution span, a high-resolution bolt loosening angle detection sensor based on Fiber Bragg Grating (FBG) with an adjustable measuring range and sensitivity is proposed. A fitting profile cam structure is adopted to transfer the bolt loosening angle to the axial elongation of the fiber, and then to the central wavelength shift of the FBG. By building the theoretical model of the sensor and through numerical analysis, the cam profile is optimized to ensure the linear relationship between the wavelength shift and the bolt loosening angle within a desired measurement range and sensitivity. An FBG bolt looseness detection sensor with easy installation and precise adjustment for distributed bolted-joints group is designed. The bolt loosening angle measurement experiments were performed for the sensor designed with the proposed method. The experimental results show that the FBG based bolt sensor has good linearity, resolution, and precision. With the current sensor structural parameters, bolt loosening angle measurement can reach 0.38°. As a new method for bolt looseness detection, the proposed method has a good application prospect in the distributed bolts group monitoring in large structures.