The influence of the choice of complexing ligand, zinc counter-ion, pH, ionic strength, supersaturation, deposition time and substrate on the nature of ZnO films grown from chemical baths (CBD) are discussed. There are significant differences between CBD and similar routes such as hydrothermal methods for ZnO films. Modelling of speciation and experimental results suggest that acicular ZnO morphologies are best obtained by limiting the concentration of one of either Zn2+ or OH− in the presence of a large excess of the other. The presence of a prior ZnO layer can facilitate nucleation at lower levels of supersaturation and enable size tailoring of ZnO columns. The point at which the substrate is introduced into the bath is crucial and can lead to a significant difference in both the width of the rods and optical transparency of the films. HR-TEM has yielded important structural information and a growth mechanism for single crystalline ZnO rods by CBD is described for the first time.
We focus on the preparation of hybrid polymer/zinc oxide (ZnO) solar cells, in which the metal oxide consists of ZnO columnar structures grown perpendicularly on a flat, dense “backing” layer, as a means to provide a direct and ordered path for photogenerated electrons to the collecting electrode. We used scanning electron microscopy, absorption spectroscopy and photovoltaic device measurements to study the morphology and device performance of the prepared structures. Different solution chemical routes were investigated for the synthesis of the inorganic device components, i.e. the ZnO columnar structures and the “backing” layers, which act as a seed-growth layer for the ZnO rods. The growth of the ZnO rods was dependent on the morphological and structural characteristics of the seed layer and moreover, the seed layer itself was also affected by the synthetic conditions for ZnO rod growth. Different polymers (high hole-mobility MEH-PPV based polymer and P3HT) were compared in these structures and power conversion efficiencies of 0.15 and 0.20% were achieved under 1 Sun illumination, respectively. Results are discussed in terms of the optoelectronic properties of the polymers.
9 January 2008 in Journal of the American Chemical Society
Perpendicularly orientated ZnO rods have been grown on thin ZnO templates, from aqueous solutions of zinc acetate and hexamethylenetetraamine (HMT); growth along the c-axis of the ZnO crystallites is promoted by the presence of acetate in the bath.
For the first time, we describe a simple, room-temperature surfactant-mediated route to inorganic mesocrystals of NH4TiOF3 and their remarkable topotaxial conversion by washing or annealing to TiO2 as anatase mesocrystals.