12 March 2008 in Environmental Science & Technology
27 December 2017 in ACS Sustainable Chemistry & Engineering
3 September 2010 in Environmental Science & Technology
20 August 2019 in ACS Sustainable Chemistry & Engineering
Agricultural waste was used as substrate for fermentation by Gluconobacter oxydans to produce lixiviant for rare earth element (REE) recovery from industrial waste materials, i.e., spent fluid catalytic cracking (FCC) catalysts. Biolixiviant generated from potato wastes performed comparably to that generated from refined glucose. Corn stover yielded a slightly less effective biolixiviant but may serve as a better industrial substrate since collection systems for stover are already in development and have been implemented in several locations. Techno-economic analysis indicated that the use of agricultural waste carbon could lead to a more cost-effective bioleaching process than refined glucose. Analyses suggested that a corn stover-based bioleaching plant would have 20% lower total costs than a potato wastewater-based plant, and a potato wastewater-based plant should have 18% lower total costs compared to a glucose-based plant. An environmental life cycle analysis showed no clear winner among the three alternatives when ten impact categories were considered simultaneously. However, a corn stover-based process generally showed less environmental impact than a potato wastewater-based process or a refined glucose-based process. Our studies indicate that using agricultural wastes as nutrients for biological production of lixiviant provides a profitable means for recovering critical metals from recyclable waste materials.
1 March 2022 in MRS Bulletin
Rare-earth element (REE) demand is expected to increase by a factor of up to 7 by 2040. Recycling avoids the significant hurdles associated with opening new mines, but collection and disassembly of REE-containing devices are barriers. Absolute and relative abundances of REEs and co-occurring constituents differ significantly in secondary compared to primary sources, presenting challenges and opportunities. REE concentrations are typically low, but manufactured devices include only the desired REE, avoiding the “REE balance problem” that besets natural ores. Fewer REEs need to be separated, as compared to separation of the entire lanthanide series. Co-recovery of precious (e.g., Au, Ag, Pt) or base metals (e.g., Cu, Sn, Zn) from e-wastes can offset recycling costs. Some examples of recently developed approaches for REE extraction and separation are presented here, with an emphasis on methods offering environmental benefits such as lower toxic chemical usage and reduced energy costs. Graphical abstract
23 September 2011 in Geochemical Transactions
Ureolytically-driven calcium carbonate precipitation is the basis for a promising in-situ remediation method for sequestration of divalent radionuclide and trace metal ions. It has also been proposed for use in geotechnical engineering for soil strengthening applications. Monitoring the occurrence, spatial distribution, and temporal evolution of calcium carbonate precipitation in the subsurface is critical for evaluating the performance of this technology and for developing the predictive models needed for engineering application. In this study, we conducted laboratory column experiments using natural sediment and groundwater to evaluate the utility of geophysical (complex resistivity and seismic) sensing methods, dynamic synchrotron x-ray computed tomography (micro-CT), and reactive transport modeling for tracking ureolytically-driven calcium carbonate precipitation processes under site relevant conditions. Reactive transport modeling with TOUGHREACT successfully simulated the changes of the major chemical components during urea hydrolysis. Even at the relatively low level of urea hydrolysis observed in the experiments, the simulations predicted an enhanced calcium carbonate precipitation rate that was 3-4 times greater than the baseline level. Reactive transport modeling results, geophysical monitoring data and micro-CT imaging correlated well with reaction processes validated by geochemical data. In particular, increases in ionic strength of the pore fluid during urea hydrolysis predicted by geochemical modeling were successfully captured by electrical conductivity measurements and confirmed by geochemical data. The low level of urea hydrolysis and calcium carbonate precipitation suggested by the model and geochemical data was corroborated by minor changes in seismic P-wave velocity measurements and micro-CT imaging; the latter provided direct evidence of sparsely distributed calcium carbonate precipitation. Ion exchange processes promoted through NH4 + production during urea hydrolysis were incorporated in the model and captured critical changes in the major metal species. The electrical phase increases were potentially due to ion exchange processes that modified charge structure at mineral/water interfaces. Our study revealed the potential of geophysical monitoring for geochemical changes during urea hydrolysis and the advantages of combining multiple approaches to understand complex biogeochemical processes in the subsurface.