7 February 2017 in IEEE Transactions on Industry Applications
To achieve relatively lower costs and higher operational efficiencies, without adopting permanent magnets or rotor conductors, the synchronous reluctance motor (SynRM) has received more and more attentions as a competitive solution recently. To establish a rational guidance for the related designs and constructions, this paper is aimed to present the thorough performance impact assessments of SynRMs that are composed of different electromagnetic steels at various operational specifications. Based on the magnetization and hysteresis characteristics of the steel sheets, variations of the average torques, torque ripples, and iron losses by using different stator and rotor materials are investigated, and some valuable comparison results can be provided for designers and engineers in the related motor and metal industries.
30 March 2020 in IEEE Transactions on Industry Applications
To meet different loading requirements in the metal industry, special attention about the operational performances and start-up characteristics of those implemented electric motors for desired driven applications must be addressed. However, because of the global warming and energy conservation concerns, the enforced operational regulations have increased the complexity of those commonly applied induction motors for supplying the desired equipment driven forces. By adopting the same stator, the synchronous reluctance motor (SynRM) can be achieved with properly redesigned rotor structure of an induction motor. Due to its robust structure and no secondary copper loss, it is very competitive for the related hoist, punch, roller, and pump applications. Furthermore, by inserting adequate ferrite permanent magnets and conductors into the rotor barriers, composition designs of the direct-on-line SynRMs (DOL_SynRMs) will also be proposed. The operational characteristics of the DOL_SynRMs for fulfilling different specifications will all be thoroughly investigated and confirmed by experimental measurements. The DOL_SynRM structures that can provide potential alternatives for related high-efficiency metal industry driven applications can thus be validated.
22 February 2017 in IEEE Transactions on Industry Applications
This paper will present the designs and feasibility assessments of a linear electromagnetic actuator that can directly provide the electric power steering (EPS) forces for an economy sized vehicle. Within the physical and operational constraints, a tubular device being composed by a linear permanent magnet motor and a magnetic gears set will be systematically designed to form the coaxially magnetic-geared linear actuator. Determinations of the optimized geometrical compositions of the motor and the gears set based on the fluxes and thrust forces will be assessed in detail. For practical considerations, the dynamic performances of the proposed EPS system and the corresponding radii of turning circles will also be evaluated at various driving speeds. It is thus confirmed that the adoptions of such electromagnetic systems for those common EPS systems are technically feasible.
8 May 2017 in IEEE Transactions on Magnetics
By appropriately inserting ferrite magnets into the rotor of a synchronous reluctance motor (SynRM), the machine operational power factors and torque outputs can be improved. With specific rotor structures to accommodate those ferrites, many of these permanent-magnet-assisted SynRMs (PMA-SynRMs) have been proposed to comply the expected operational objectives. For construction convenience, the ferrites that being inserted into the flux barriers of these PMA-SynRMs are generally in rectangular shapes; hence, some adjustments on the rotor flux barriers and additional bridges are required. Such changes will inevitably affect the performance of the original SynRMs with optimized rotor structures, and these tradeoffs are thus to be recovered by parts of those adopted ferrites. This paper will provide an evaluation index that can characterize the performance of PMA-SynRMs with different volume compositions of the ferrites, along with the impact assessments of the SynRMs with modified flux barriers such that those ferrites can be properly allocated. Based on the designs obtained from thorough 3-D finite-element analyses, a 3-hp PMA-SynRM will be constructed and the related experimental measurements will also be supported to validate the design adequacies.
15 January 2018 in IEEE Transactions on Industry Applications
To meet the increasingly stringent regulations on operational efficiencies of electric motors, efforts have been devoted to design and construct motors with less power losses. Without the need of rotor conductors, and hence, no secondary copper loss, the feasibilities of applying synchronous reluctance motor (SynRM) have attracted many attentions on the related industries. Since the operation of SynRM is mainly based on the reluctance torque, appropriate electromagnetic steel selections for the motors will be the key factors. To adequately evaluate the performance of SynRM, with the available magnetization and hysteresis characteristics of the commercial steel sheets, the SynRMs that are composed of different electromagnetic steels at various operational specifications will be thoroughly investigated. From theoretical analyses of the selected SynRMs by different stator and rotor material compositions along with experimental validations, valuable guidance for related SynRM constructions and operations can thus be provided for steel manufacturers and motor designers.
8 March 2021 in IEEE Transactions on Industry Applications
To meet the severe operating conditions in the metal industry, more thorough design and operational assessments about those implemented electric motors for specific applications must be emphasized. With its inherent robust structure, the induction motor is generally adopted to fulfill such driven objective. However, due to global warming and energy conservation concerns, those strictly enforced regulations have potentially increased the complexity and cost of high efficiency induction motor. Since the synchronous reluctance motor (SynRM) has relatively simpler structure with no copper loss in its rotor, it is a very attractive alternative for accomplishing the high-efficiency objectives of those common hoist, punch, roller, and pump applications. In addition, to eliminate drive circuits that can further reduce the overall system construction costs, the rotor barriers of the SynRM can be equipped with direct-on-line capability (DOL_SynRM) with conductors filled in. The impacts to the operational performance of these DOL_SynRMs for different applications will all be thoroughly investigated. The competitive high-efficiency DOL_SynRMs for driving various metal industry equipment can thus be offered.