Francesca Mancini

Francesca Mancini

Auto-generated profile, based on publicly available information

Francesca Mancini

International Research School of Planetary Sciences, University, “G. D’Annunzio” of Chieti-Pescara, Pescara, Italy

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 September 2022
Verified
Conference Paper
Open access
FMFrancesca Mancini
Francesca Mancini
ATAdriano Tullo
Adriano Tullo
PAPascal Allemand
Pascal Allemand
GOGian Gabriele Ori
Gian Gabriele Ori
Introduction Studying planetary field analog environments is a key point in order to define the physical and chemical parameters that favor life on Earth and other planets. Terrestrial hydrothermal springs have long been considered among the most significant planetary analogs searching for traces of life on Mars [1]. Hyperspectral data have been recognised to be more suitable for the detailed mapping and identification of rocks and minerals identification of land surface, especially for minerals [2]. Notwithstanding the technological advances, hyperspectral satellites are still poorly represented in spaceborne missions for Earth Exploration compared to multispectral ones. In this context, the Italian Space Agency (ASI) EO mission named PRISMA (PRecursore IperSpettrale della Missione Applicativa, [3]) offers a great opportunity to improve the knowledge about the scientific applications of spaceborne hyperspectral data. PRISMA, launched in March 2019, includes a panchromatic and a hyperspectral camera with 239 spectral bands. Specifically, the PRISMA satellite comprises a high-spectral resolution Visible Near InfraRed (VNIR) and Short-Wave InfraRed (SWIR) imaging spectrometer, ranging 400-2500 nm, with 30 m ground sampling distance (GSD) and 5 m GSD for the panchromatic camera [4]. Our analysis with PRISMA images was mainly performed on an arid environment in a remote region of NE Ethiopia (Dallol; Long: 40.299351, Lat: 14.244367), representing an exceptional Mars analog due to diffuse hydrothermal alteration and the sulfate deposits evocative of past hydrothermal activity on Mars. This work aimed to obtain an identification map of minerals and their relative abundance using hyperspectral imaging to understand the potential of PRISMA as analog probe of Mars orbital instruments to detect and study possible analogs on Earth. Study Area Dallol is situated in the Danakil Depression, which is part of the East African Rift System. Principal geothermal features of the central crater area of Dallol are salt pillars, circular manifestations and acidic ponds. The northern and southern part is dominated by a salt dome structure and Salt pinnacles in the SW salt canyon area. The Black Mountain and the super-saline Black Lagoon, just south-southwest of Dallol, is an area of salt extrusions, geothermal manifestations and brine upflows. One advantage of this area is that the nebulosity is generally low, in fact the image selected during the dry season has a cloud coverage percentage of less than 1%. A salt suite was deposited and re-worked by hydrothermalism in the selected site. The characteristic minerals of the area are: carbonate, halite, carnallite and bischofite, anhydrite, gypsum, native sulfur of hydrothermal origin [5; 6]. Flooding episodes from the Lake Assale to the north due to intense winds acting over the flat topography of the depression. The PRISMA SWIR Land/Water band combinations on the image selected, helped us to choose the region of interest around the Dallol area. Operational Hyperspectral Processing PRISMA images have three different levels of processing. Level 2C and 2D geolocated and atmospherically corrected images were used in this work and dated 21 August 2021. it is worth noticing that the images acquired on Dallol prior to the image selected for analysis had several preprocessing problems, particularly for stripe removal. The operational hyperspectral processing is composed of three main processing steps: (1) dimensionality reduction; (2) endmember identification and (3) mineral map distribution and abundance estimation. An unexpected result was obtained by applying an additional atmospheric correction, the Internal Average Relative Reflectance with Dark Subtraction, on the L2C image already corrected during the principal component analysis (PCA). The corrected atmospheric PCA allows better highlighting of geomorphological features. As for step (1), since hyperspectral images are composed of hundreds of extremely correlated bands, it is possible, and indeed beneficial, to reduce the effective dimension of the input data by removing bad bands. Step (2) was performed using the THOR Hyperspectral Material Identification (in ENVI 5.6) to identify unknown spectral signatures by comparing them with spectral libraries. This tool considers background statistics and image endmembers and can therefore provide accurate responses and spectra plots for rare or sub-pixel targets. Finally, the Spectral Angle Mapper (SAM) and the Linear Spectral Unmixing (LSU) tools were adopted for step (3). SAM determines the spectral similarity between two spectra by calculating the angle between the spectra and treating them as vectors in a space with dimensionality equal to the number of bands. LSU is a standard technique for spectral mixture analysis that infers a set of endmembers and fractions of these, called abundances. The mineral distribution and the abundance maps are shown respectively in Fig.1 and Fig.2. Conclusion Six minerals have been recognised with the SAM classification from ENVI spectral library, in excellent agreement with the previous studies: carnallite, jarosite, kainite, polyhalite, gypsum and nontronite. The results confirm the mineralogical variability typical of the Dallol; in Fig.2, high mineral abundance values are shown in blue. The error calculated with the RMS is very low over the entire area of interest, except for the central zone where there are sulphur pools and therefore the presence of water does not favour this type of analysis.  To better constrain the mineralogical mapping, future work will be conducted by a field exploration campaign to collect spectral signatures to be added to the ENVI library used, which so far could not be organised due to the ongoing civil war in Dankalia. To sum up, the study of terrestrial analogs can provide insights into the probable presence and nature of spring deposits on Mars, as well as help develop methods for classifying...

28 December 2021 in Bulletin of the Seismological Society of America
Verified
Journal Article
Closed access
PDF file
FMFrancesca Mancini
Francesca Mancini
Sebastiano D'AmicoSebastiano D'Amico
Sebastiano D'Amico
GVGiovanna Vessia
Giovanna Vessia
Local seismic response (LSR) studies are considerably conditioned by the seismic input features due to the nonlinear soil behavior under dynamic loading and the subsurface site conditions (e.g., mechanical properties of soils and rocks and geological setting). The selection of the most suitable seismic input is a key point in LSR. Unfortunately, few recordings data are available at seismic stations in near-field areas. Then, synthetic accelerograms can be helpful in LSR analysis in urbanized near-field territories. Synthetic accelerograms are generated by simulation procedures that consider adequately supported hypotheses about the source mechanism at the seismotectonic region and the wave propagation path toward the surface. Hereafter, mainshocks recorded accelerograms at near-field seismic stations during the 2016–2017 Central Italy seismic sequence have been compared with synthetic accelerograms calculated by an extended finite-fault ground-motion simulation algorithm code. The outcomes show that synthetic seismograms can reproduce the high-frequency content of seismic waves at near-field areas. Then, in urbanized near-field areas, synthetic accelerograms can be fruitfully used in microzonation studies.

23 September 2022
Verified
Conference Paper
Open access
MCMarta Ciążela
Marta Ciążela
Jakub CiazelaJakub Ciazela
Jakub Ciazela
BPBartosz Pieterek
Bartosz Pieterek
FMFrancesca Mancini
Francesca Mancini
DMDariusz Marciniak
Dariusz Marciniak
FGFelipe Gomez
Felipe Gomez
Data from martian rovers and martian meteorites indicate that ore minerals are common on Mars including sulfides such as pyrite, pyrrhotite, chalcopyrite and pentlandite. Three spectrometers: CRISM (The Compact Reconnaissance Imaging Spectrometer for Mars; spectral range 0.4−3.9 µm) onboard Mars Reconnaissance Orbiter (MRO), OMEGA (Observatoire pour la Mineralogie, l'Eau, les Glaces et l’Activité; spectral range 0.4 - 5.1 µm), and PFS (Planetary Fourier Spectrometer; spectral range 1.3-45.0 µm) onboard Mars Express (MEX) operate in near infrared (NIR) spectrum and provide information on the mineral composition of Mars. However, none of those is yet capable to efficiently identify sulfides. Detecting sulfide ore deposits is difficult in the NIR range due to spectral interferences with silicates (Fig. 1). Due to the limited in-situ measurements by the Opportunity, Spirit, Curiosity, and Perseverance rovers, Mars mineralogical studies must be supported by studies of terrestrial analogs. The most suitable analog for study of ore minerals is the Rio Tinto area in Andalusia, Spain, which hosts the largest known volcanogenic massive sulfide deposits on Earth (Martin-Izard et al., 2015). In this area, we analyzed satellite images available in the near infrared spectrum, and thus Sentinel-2, ASTER, and Landsat 8. Principle Component Analysis (PCA) of the obtained spectra from Sentinel-2 (Fig. 2), which has the best field resolution (10 m) of the three, gives similar results to mineralogical data we have retrieved in the field during our geological mapping in March 2022 (see Ciazela J. et al., this session). By establishing our test field for remote sensing of sulfide deposits in a PFA site on Earth, we will be able to determine abundance thresholds for the detection of major sulfide phases on Mars and identify their key spectral features. Our results will help in 1) more efficient use of the current NIR Martian spectrometers to detect ore minerals and 2) designing new space instruments optimized for ore detection to include in future missions to Mars such as one developed at the Institute of Geological Sciences and the Space Research Centre of the Polish Academy of Sciences called MIRORES (Martian far-IR ORE Spectrometer). Acknowledgments: The presented research are supported by Europlanet2024-research infrastructure grant no. 20-EPN2-020 and National Science Centre of Poland project OPUS19 no. 2020/37/B/ST10/01420 to J. Ciazela. References: Horgan, B.H.N., Cloutis, E.A., Mann, P., Bell, J.F., 2014. Near-infrared spectra of ferrous mineral mixtures and methods for their identification in planetary surface spectra. Icarus 234, 132–154. Martin-Izard, A., Arias, D., Arias, M., Gumiel, P., Sanderson, D.J., Castañon, C., Lavandeira, A., Sanchez, J., 2015. A new 3D geological model and interpretation of structural evolution of the world-class Rio Tinto VMS deposit, Iberian Pyrite Belt (Spain). Ore Geol. Rev. 71, 457–476. Figure 1. Near-infrared (NIR) spectra of pyrites S142 and S29 compared to those of clinopyroxenes PYX126, PYX019, PYX009, and PYX115, which are all described by Horgan et al. (2014). Note the lack of distinct spectral features in pyrites and their similarity to the NIR spectra of some clinopyroxenes. Considering the low pyrite abundances compared to those of clinopyroxene, pyrite is difficult to observe in the NIR range. The y-axis has no numerical scale as the plots are shifted for clarity. Figure 2. False-color composite, Sentinel-2A PCA (10 m/px) for the study area: PC1, PC2, and PC3 in R, G, and B channels, respectively. PCA image was calculated from the original 9-band (VNIR + SWIR) of Sentinel-2A (bands 1, 9, and 10 were excluded from this analysis as they do not contain mineralogical/geological information). Three first PCA components (PCA1, PCA2, and PCA3), containing the highest topographical and spectral information, are suitable for lithological discrimination, especially for arid region such study area. The pink color indicates areas with high pyrite content. The white frame in panel 'a' marks the region of the Rio Tinto Mining area in Spain. The white frame with the star in panel 'b' shows our study area for geological mapping (see Ciazela J. et al., this session).

29 October 2021 in ESS Open Archive
Verified
Preprint
Open access
ATAdriano Tullo
Adriano Tullo
FMFrancesca Mancini
Francesca Mancini
GOGian Ori
Gian Ori
Virtual reality (VR) is an important tool for several applications in science, industry, and education. Previous studies have already shown how the use of VR at full scale is an effective tool for outcrops characterization even at centimetre scale [1]. We aim to extend the use of this approach in various fields of planetary exploration, from outcrop to regional scale. This regional approach may provide an effective support for the planning and management of future missions, but also for geological and geomorphological studies and mapping. Among the most obvious advantages of the use of virtual reality are the lack of optical deformations and approximate dimensions of the two-dimensional display (such as display, projections and printed cartography) and the opportunity to layer various levels of information through a new concept of superposition. The VR environment is derived from several multi-scale elements: medium to high-resolution elevation data, photogrammetric 3D models, orthophotos, multispectral data, thematic maps and vector data transformed into three-dimensional digital representations placed in the study context. The first tests are based on stereogrammetry (using USGS ISIS [2] and NASA ASP [3]) of the lunar LRO (LROC-NAC) [4] and Martian MRO (CTX and HiRISE) [5] and MEX (HRSC) [6] missions and on data and cartography realized through external open-source GIS tools (GDAL libraries, QGIS, GRASS) and virtual tools developed to be used within the VR environment. In our tests, for example, the Rock Abundance analysis results have been shown not only as thematic maps but also as digital representations of floating boulders on the surface. This has been achieved by placing major rock elements (>1m) in the position detected from satellite imagery and smaller elements, estimated from size-frequency distributions studies, with a preliminary semi-random distribution. References [1] Mouélic S. L. et al. (2019), Geophys. Res. Abstr, Vol. 21. [2] Becker K. J. et al. (2013), LPSC, Vol. 44. [3] Moratto Z. M. et al. (2010), LPSC, No. 1533, p. 2364. [4] Robinson M. S. et al. (2010), Space Sci. Rev., 150: 81-124. [5] McEwen A. S. et al. (2007), J. Geophys. Res. Planets, 112.E5 [6] Neukum G. & Jaumann R. (2004). Mars Express: The Scientific Payload, Vol. 1240, pp. 17-35.

13 March 2026
Verified
Conference Paper
Open access
CGClara Guth
Clara Guth
FMFrancesca Mancini
Francesca Mancini
PAPascal Allemand
Pascal Allemand
FSFrancesco Salese
Francesco Salese
GOGian Gabriele Ori
Gian Gabriele Ori
Characterizing lunar surface mineralogy is essential for understanding crustal evolution, magma ocean differentiation, impact excavation processes, and identifying In-Situ Resource Utilization (ISRU) targets for future exploration. This study determines the mineralogical composition and crustal stratigraphy across four geologically distinct lunar terrains using Moon Mineralogy Mapper (M³) hyperspectral data: the Aristarchus plateau (volcanically complex), Dionysius crater (a pristine impact structure), the Malapert region (ancient highlands of the South Pole), and Leibnitz R (primordial anorthositic crust).Level-2 M³ hyperspectral cubes (430-3000 nm, 140 m/pixel) [1] were processed through systematic workflows: destriping, photometric normalization, Minimum Noise Fraction (MNF) transform, Pixel Purity Index (PPI) endmember extraction, continuum removal, and Spectral Angle Mapper (SAM) classification. Spectral signatures were validated against RELAB laboratory spectra resampled to M³ resolution. Key mineral phases identified include anorthite, low-calcium pyroxene (LCP), high-calcium pyroxene (HCP), olivine, spinel-bearing assemblages, and ilmenite.Aristarchus exhibits the highest mineralogical diversity [2], with anorthositic highland material, HCP- and LCP-bearing mafic units, and localized olivine signatures. Anorthosite absorption features (1.25 µm band depth) dominate the crater floor, pyroxene signatures characterize the ejecta blanket, and olivine (1 µm band depth) appears along crater rims. This heterogeneity reflects volcanic emplacement and deep impact excavation, offering diverse oxygen-rich and iron-bearing ISRU targets.Dionysius (Mare Tranquillitatis) reveals systematic radial mineralogical zonation from HCP-dominated rim materials to LCP-enriched central exposures, indicating excavation through compositionally stratified crust. This vertical gradient constrains upper crustal HCP overlying lower crustal LCP layers [3,4], consistent with magma ocean crystallization models. Olivine and ilmenite detections suggest penetration to mafic lithologies, constraining crust-mantle differentiation.Malapert (South Pole) is predominantly anorthositic, with isolated spinel-bearing outcrops (5% band depth at 2 µm) associated with uplifted crustal blocks. These exposures constrain deep crustal composition and early magma ocean differentiation. The area's abundant anorthosite and its location near permanently shadowed regions make it a key site for oxygen extraction and the establishment of polar exploration facilities.Leibnitz R (far side) displays spectrally pure anorthositic composition, representing primordial crust formed during lunar magma ocean plagioclase flotation. Its compositional homogeneity provides a reference for early lunar differentiation and high-purity feedstock for ISRU oxygen production.This study integrates hyperspectral mineralogy with surface morphology to constrain crustal architecture and geological evolution across diverse lunar environments. The methodology establishes a replicable framework for hyperspectral analysis applicable to future mission planning, linking fundamental crustal processes to ISRU resource assessment and advancing sustainable lunar exploration strategies.References: [1] Green et al. (2011) JGR: Planets, 10.1029/2011JE003797; [2] Chevrel et al. (2009) Icarus, 10.1016/j.icarus.2008.08.005; [3] Moriarty & Pieters (2018) JGR, 10.1002/2017JE005364; [4] Wieczorek et al. (2013) Science, 10.1126/science.1231530Acknowledgement: EU HORIZON-MSCA-2023-SE-01, Grant 101183089

26 October 2021 in ESS Open Archive
Verified
Preprint
Open access
FMFrancesca Mancini
Francesca Mancini
GVGiovanna Vessia
Giovanna Vessia
SDSebastiano D'AMico
Sebastiano D'AMico
Local Seismic Response (LSR) studies are considerably conditioned by the seismic input features due to the non-linear soil behavior under dynamic loading and the sub-surface site conditions (e.g., mechanical properties of soils and rocks and geological setting) [1][2]. The selection of the most suitable seismic input is a key point in LSR. Unfortunately, a few natural recordings are available at seismic stations in near field areas [3][4]. Then, synthetic accelerograms can be helpful in LSR analysis in urbanized near field territories. Synthetic accelerograms are generated by simulation procedures that consider adequately supported hypotheses about the source mechanism at the seismotectonic region and the wave propagation path towards the surface. Hereafter, mainshocks recorded accelerograms at near field seismic stations during the 2016-17 Central Italy seismic sequence have been compared with synthetic accelerograms calculated by EXSIM code [5] [6]. The outcomes show that synthetic signals can reproduce the high-frequency content of seismic waves at near field areas. Then, in urbanized near field areas, synthetic accelerograms can be fruitfully used in Microzonation studies. References [1] Vessia G. et al. (2013), Bull. Earthq. Eng., 11(5), 1633-1660. [2] Vessia G. et al. (2021), Eng. Geol. 284, 106031. [3] Mancini F. et al. (2018), ESC2018, S29-639: 428429. [4] Luzi L. et al. (2016), Istituto Nazionale di Geofisica e Vulcanologia, Observatories & Research Facilities for European Seismology. [5] Boore D. M. (2003), Pure Appl. Geophys. 160 635–675. [6] Motazedian D. and Atkinson G. M. (2005), Bull. Seismol. Soc. Am. 95 995–1010.