18 July 2013 in Modelling and Simulation in Materials Science and Engineering
We present a phase field model for investigating grain growth in polycrystalline ceramics containing porosity. Grain growth in such materials is complicated by the interaction between the pores and the grain boundaries, which tends to hinder the kinetics of grain growth. In addition to grain-boundary migration, the model takes into consideration pore-surface diffusion and, whenever effective, other diffusion mechanisms such as volume diffusion and grain-boundary diffusion. The pore-surface diffusion controls the pore mobility. A direct relationship between the model parameters and the material properties is established, which facilitates the quantitative analysis of grain growth. The model is used to investigate the conditions under which porosity is effective in controlling grain growth. Application of the model to ceria shows that grain growth law in this material is sensitive to the level of porosity. In particular, the grain growth in ceria gradually changes from boundary controlled growth to pore controlled growth as porosity increases. The effects of porosity, temperature, grain boundary and surface mobility on grain growth were investigated. The model results agree well with published grain growth experiments.
1 November 2013 in Journal of Nuclear Materials
15 November 2005 in Journal of Applied Physics
Studies of the creation of damaged regions leading to failure are conducted using flat-top and triangular shock waves generated in gas-gun experiments as well as quasi-isentropic ramp waves. Shock waves are used to generate release waves, both behind the shock and on reflection at the free surface. It is the interaction of these release waves that places the material in a state of tension which can ultimately result in damage and possibly complete failure. The peak tensile stress and its location in the material are determined by the wave shape. Damage evolution processes and localized behavior are studied under flat-top, triangular, and ramp wave loading∕unloading using time-resolved free-surface velocity interferometry and post-experiment metallurgical analysis of the soft recovered samples.
1 May 2007 in Materials Science and Engineering: A
1 April 2014 in Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
4 March 2015 in Journal of Materials Research