Solar heat helps harvest humidity: Atmospheric humidity and droplets constitute a huge freshwater resource, especially at the low relative humidity (RH) levels typical of arid environments. Water can be adsorbed by microporous materials such as zeolites, but often, making these materials release the water requires too much energy to be practical. Kim et al. used a metal-organic framework (MOF) material that has a steep increase in water uptake over a narrow RH range to harvest water, using only ambient sunlight to heat the material. They obtained 2.8 liters of water per kilogram of MOF daily at 20% RH. Science , this issue p. 430
In their comment, Bui et al . argue that the approach we described in our report is vastly inferior in efficiency to alternative off-the-shelf technologies. Their conclusion is invalid, as they compare efficiencies in completely different operating conditions. Here, using heat transfer and thermodynamics principles, we show how Bui et al .’s conclusions about the efficiencies of off-the-shelf technologies are fundamentally flawed and inaccurate for the operating conditions described in our study.
The Comment by Meunier states that the process we described in our report cannot deliver the claimed amount of liquid water in an arid climate. This statement is not valid because the parameters presented in our study were inappropriately combined to draw misguided conclusions.
In comparison to conventional fossil fuel powered cars, electric vehicle (EV) technology faces a substantial challenge in terms of driving range, especially when the climate control system relies entirely on the onboard electric battery. The conventional heating system using resistive heaters and cooling via vapor compression can result in a significant reduction in mileage. Therefore, we report an adsorption-based advanced thermal battery (ATB) capable of delivering both heating and cooling for electric vehicles, which operates with minimal use of the on-board electric battery bank. While the traditional adsorption based climate control systems are often bulky and heavy, ATB is compact and light-weight with higher energy and power densities compared to current adsorption based systems. A theoretical analysis is carried out to determine the overall performance of the ATB-based climate control in terms of energy density as a function of the ATB design, adsorption properties and operating conditions. Using zeolite 13X-water, the theoretical analysis shows that the ATB can provide heating and cooling densities in excess of 0.4 and 0.2 kWh/kg.