A large-scale 1-bit reconfigurable reflectarray with the feature of fast steerable monopulse patterns, has been designed and tested at X-band. The reflectarray element integrates one PIN diode to reconfigure the reflective phase between 0° and 180°. The entire reflectarray is composed of 160×64 elements, with a total size of 2.56m×1.024m. Critical design issues, including element modeling, subarray optimization, and feed horn selection, are investigated to achieve good radiation performance. For the purpose of realizing fast beam steering, 160 field-programmable gate arrays (FPGAs) are adopted to control “ON/OFF”( states of every PIN diodes in parallel. Digital beam forming methods have been applied to scan both the sum and difference beams. The reflectarray has been fabricated and measured in an anechoic chamber, and a high gain (37.4dBi) with relatively good aperture efficiency (17.1%) has been realized in such a large-aperture size. Precise monopulse beam steering within ±60° azimuth range has been achieved with the switching time of only 2μs. This large-aperture reflectarray shows promising applications for tracking and detecting systems.
In this study, a high-performance orbital angular momentum (OAM) beam is designed, analyzed and experimented using a 1-bit programmable metasurface. OAM as a novel technology is investigated systematically in this paper. Moreover, this study is motivated by the application requirements of real-time controllable communication. The proposed programmable metasurface comprises 1-bit phase modulation units with only two phase states, which is evolved from an electromagnetic surface composed of 360° continuous phase units based on the principle of 1-bit phase quantization. First, the necessity and feasibility of developing the OAM beam based on 1-bit programmable metasurface are studied. Then, qualitative analysis of OAM beams is conducted on different OAM modes and phase modulation elements. Next, the quantitative indexes of OAM beams such as the peak gain in far-field, the divergence angle of main lobe, and circumferential symmetry in azimuth planes are systematically analyzed through a survey of key factors. It is noteworthy that this analysis provides a powerful research basis to achieve an excellent OAM beam with the adjustable function. Thereafter, an active reflective programmable metasurface with 48×48 elements is fabricated to verify the feasibility of developing an OAM beam using a 1-bit element. The experimental and simulation results are in good agreement. Furthermore, a high gain OAM beam with a narrow divergence angle is realized by using the large-scale 1-bit programmable metasurface. Notably, a high-gain beam and an OAM beam can be both generated and can converted into each other, which lays the foundation to achieve the OAM beam with the function of real time dynamic control in future.
6 April 2021 in IEEE Transactions on Antennas and Propagation
In this work, a new technique to characterize a microwave orbital angular momentum (OAM) beam applying a single-sensor compressive imaging (SSCI) strategy is reported, which is much more time-efficient, cost-effective, and compact than traditional near-field scanning methods. A microwave spatial wave modulator (MSWM) realized by a programmable metasurface is applied to generate random mask patterns and modulate an OAM beam under test. The modulated fields are collected by a single-sensor detector. Two different algorithms can be used to reconstruct phase and magnitude profiles of the OAM beam, with the first one demands both amplitude and phase measurement while the second one only perceives the amplitude or intensity. Simulations are first carried out to investigate the effects of several parameters of the random mask patterns on the quality of reconstruction. Proof-of-concept experiments are then performed to characterize a microwave OAM beam, and obtained results show high-quality reconstructed phase and magnitude distributions of the OAM beam under test, which corroborates the effectiveness of the proposed SSCI technique. This work establishes an alternative paradigm for fast and economic measurement of microwave and millimeter-wave OAM beams. It may also facilitate OAM-based communication applications.
This paper reviews the recent research progress on reconfigurable reflectarrays (RRA) and reconfigurable transmitarrays (RTA) at Tsinghua University. Numerous antenna designs are presented, including W-band RRA, 2-bit RRA, 10240-element RRA, 2-layer RTA, and current-reversal RTA. Furthermore, the RRA and RTA demonstrate a promising potential in advanced wireless systems. As an example, a RRA-based security imaging system is illustrated in details.
23 April 2025 in IEEE Transactions on Terahertz Science and Technology
Reconfigurable reflectarray antennas (RRAs) at sub-millimeter and terahertz frequencies are critical for communications and imaging applications. This study examines, fabricates, and measures an RRA integrated with a gallium nitride (GaN) high electron mobility transistor (HEMT) device, operating at 220GHz. A reflectarray element on a sapphire substrate, incorporating a GaN HEMT device and a matching circuit, is designed to achieve a 1-bit phase shift of the reflected wave. Detailed analyses of the HEMT device model and the sub-millimeter element design are conducted. The proposed RRA is fabricated using standard chip processes, resulting in a 16×16 element array on an 11.2×11.2×0.1mm³ chip. The 1-bit phase-shift performance is validated through two-state reflection coefficient measurements. Due to the fabrication challenges of element control, a column-control biasing network is implemented. The 1-D beam-scanning capability of the RRA prototype is experimentally demonstrated at 220GHz, achieving a scanning angle of up to 40°. The experimental results demonstrate strong agreement with theoretical predictions.
23 July 2025 in IEEE Antennas and Wireless Propagation Letters
This study presents a method for efficiently computing the scattering of reflect-arrays using equivalent homogenization parameters. The approach employs the surface susceptibility model (SSM), a parametric model of metasurfaces, alongside rational fitting techniques, the Debye model, and finite-difference time-domain (FDTD) analysis. This combination enables accurate estimation of the scattered fields from reflect-arrays, achieving results comparable to full-wave analysis. Unlike related publications, this study addresses three limitations of prior methods: 1) focus on real arrays instead of virtual surfaces; 2) incorporation of both electric and magnetic parameters; and 3) simplified Debye-based implementation compared to Lorentz models.