1 May 2018 in Journal of Hydraulic Engineering
A new shaft spillway composed of an inlet structure that includes inlet swirling-flow-generating piers, an annular weir, a vertical shaft, and an outlet structure is presented. Major factors influencing the inlet’s discharge coefficient, including the number of piers, pier weir angle, weir head, and pier height are discussed. An empirical discharge coefficient equation using a relative dimensionless weir head is presented in order to provide design guidance. Model experiments and numerical simulations are conducted regarding the flow behavior of the proposed inlet and vortex drop structure performance. Hydraulic characteristics such as the flow pattern, air core distribution, annular hydraulic jump position, pressure profiles, and water profiles of the outlet tunnel are obtained and agree well with the measured experimental data. Results show that the flow around the inlet is divided into a free-flow swirling region near the piers and submerged-flow region at the piers. The flow rate grows nearly linearly with the relative dimensionless weir head in the submerged region, and the discharge coefficient is approximately constant at 0.223. Experiments and simulations reveal the rotational flow movement mechanism of the self-regulating underwater swirl piers and the energy dissipation of the new vortex drop shaft spillway. Analytic calculations for the resultant velocity and water course thickness of the shaft sections correlate well with the results of a numerical simulation.
3 September 2015 in Journal of Hydraulic Research
This article presents a stochastic splash model for analysing the artificial rainfall caused by flood discharge splash in large hydropower stations. In this model, the splash phenomenon is considered as a random process, the flight paths of the splashed droplets are tracked by solving the particle motion equations, and the volume of each droplet is accumulated into a grid on the ground corresponding to its landing coordinates. A neural network was employed to compute the wind velocity vectors and the ground elevations to control the droplet motion and flight time. Thus, the model can account for the influence of the wind field and natural terrain on the rainfall distribution. An indoor splash experiment and field measurements were conducted to compare the measured data with the numerical results, and they showed satisfactory agreement.
15 February 2014 in Irrigation Science
1 January 2017 in Journal of Irrigation and Drainage Engineering
Zero-inertia equations are more easily numerically solved than complete hydrodynamic equations. Thus, the zero-inertia equations were applied to describe the surface water flows in 2D basin irrigation. Then, finite-volume and finite-difference approaches in the spatial cell and cell interface spatially were applied to discretize the continuous and momentum components of zero-inertia equations, respectively. Meanwhile, a dual time-stepping approach was implicitly implemented to achieve unconditional stability. The Gauss–Seidel iterative method was used to solve the space–time discretized expressions of the zero-inertia equations, and an efficient numerical model for 2D basin irrigation was developed. Three field experiments were conducted to validate the developed model. The validated results show that the developed model presents good agreement between the simulated and observed data, and achieves more mass conservation than the existing model. Its high efficiency is suitable for practical engineering.
11 February 2012 in Procedia Engineering
The concept of eco-friendly trend of dam construction, Energy dissipation of hydraulic jump is a good type of energy dissipator. The use of stilling basin with step-down floor can remarkably decrease flow velocity on the floor and operation risk. In the context of a number of high dam adopted this energy dissipator in recent years, this article studied the relationship of reattachment length, step height, flow depth on the step and velocity on the step applying two-phase flow numerical simulation combining RNG k-ɛ Turbulence mode with VOF method. The simulation result show that the reattachment length does not change with the velocity on step under certain conditions in the variable of Step height and flow depth on the step. Based on the dimensionless parameter of L/d (Reattachment Length /step heigh) and d/h0 (step height/flow depth on the step), their fitting curves are established.