Rock masses are heterogeneous materials containing a large number of discontinuities, and the failure of the natural rock mass is induced by the crack propagation and coalescence of discontinuities, especially for the rock mass around tunnel or underground space. Because the deformation or failure process of jointed rock mass exhibits strongly nonlinear characteristics, it is also very difficult to predict the strength and failure modes of the rock mass. Therefore, it is very necessary to study the failure mechanisms of jointed rock mass under different stress conditions. Apart from the stress condition, the discontinuities geometry also has a significant influence on the mechanical behavior of jointed rock mass. Then, substantial, experimental, and numerical efforts have been devoted to the study of crack initiation, propagation, and coalescence of rock or rock‐like specimens containing different kinds of joints or fissures. The purpose of this review is to discuss the development and the contribution of the experiment test and numerical simulation in failure behavior of jointed rock or rock‐like specimens. Overall, this review can be classified into three parts. It begins by briefly explaining the significance of studying these topics. Afterwards, the experimental and numerical studies on the strength, deformation, and failure characteristics of jointed rock or rock‐like materials are carried out and discussed.
Low‐field nuclear magnetic resonance (NMR) technology has the characteristics of nondestructive, rapid, and accurate. In the present paper, the mechanical properties and the size and distribution of pores of cement mortar during freeze‐thaw cycles were studied by using the NMR technology for the first time. The change law of surface and quality, compressive strength, splitting tensile strength, and elastic modulus of cement mortar under 0, 25, 50, 75, and 100 freeze‐thaw cycles were studied. And the changes of T2 spectra of cement mortar under different freeze‐thaw environments were analyzed; the change rule between freeze‐thaw cycles and the size of the pore within the cement mortar were also obtained. Moreover, the relationship between the mechanical properties and the pore structure of cement mortar was studied.