This paper describes the rotor design of high-speed permanent magnet (PM) synchronous motors (PMSMs) consider-ing rotor magnet and sleeve materials. The influence of four dif-ferent sleeve materials with two different PM materials on the mechanical stress of a high-speed PM rotor is presented, and the relationship between sleeve thickness and shrink fit is examined. Rotor design criteria according to rotor materials are described by an analytical method. The proposed method is validated by an actual opera-tional test at 400,000 rpm using a fabricated proto-type rotor.
This paper presents design guidelines for a high-speed permanent magnet synchronous motor (PMSM) for a 110 hp and 12 500 r/min centrifugal pump considering the mechanical and electromagnetic characteristics. We selected the size of the rotor based on the torque per unit rotor volume method. The rotor stress analysis was performed using the analytical method and the finite-element method. Based on these results, appropriate sleeve thickness and material were selected considering mechanical stability and electrical performance. The PMSM design was carried out by using the mechanically stable rotating body, and the model with excellent electromagnetic performance was selected based on the iron loss analysis and the eddy current loss analysis using the finite-element method. In addition, the stability of high-speed operation was confirmed by the critical speed analysis of the finally designed PMSM model. The high-speed PMSM verifies the performance through the manufacturing and test it was confirmed that there is no problem when applied to the actual centrifugal pump systems.