Hengky Chandrahalim

Hengky Chandrahalim

Auto-generated profile, based on publicly available information

Hengky Chandrahalim

Department of Electrical and Computer Engineering Air Force Institute of Technology Wright‐Patterson Air Force Base Dayton OH 45433 USA

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 May 2012 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
Verified
Journal Article
Closed access
Clementine M BoutryClementine M Boutry
Clementine M Boutry
HCHengky Chandrahalim
Hengky Chandrahalim
PSPatrick Streit
Patrick Streit
MSMichael Schinhammer
Michael Schinhammer
AHAnja C. Hänzi
Anja C. Hänzi
CHChristofer Hierold
Christofer Hierold
A new generation of partially or even fully biodegradable implants is emerging. The idea of using temporary devices is to avoid a second surgery to remove the implant after its period of use, thereby improving considerably the patient's comfort and safety. This paper provides a state-of-the-art overview and an experimental section that describes the key technological challenges for making biodegradable devices. The general considerations for the design and synthesis of biodegradable components are illustrated with radiofrequency-driven resistor–inductor–capacitor (RLC) resonators made of biodegradable metals (Mg, Mg alloy, Fe, Fe alloys) and biodegradable conductive polymer composites (polycaprolactone–polypyrrole, polylactide–polypyrrole). Two concepts for partially/fully biodegradable wireless implants are discussed, the ultimate goal being to obtain a fully biodegradable sensor for in vivo sensing.

8 December 2008 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
HCHengky Chandrahalim
Hengky Chandrahalim
SBSunil A. Bhave
Sunil A. Bhave
RPRonald Polcawich
Ronald Polcawich
JPJeff Pulskamp
Jeff Pulskamp
DJDaniel Judy
Daniel Judy
MDMadan Dubey
Madan Dubey
This paper provides a quantitative comparison and explores the design space of lead zirconium titanate (PZT)–only and PZT-on-silicon length-extensional mode resonators for incorporation into radio frequency microelectromechanical system filters and oscillators. We experimentally measured the correlation of motional impedance (RX) and quality factor (Q) with the resonators’ silicon layer thickness (tSi) . For identical lateral dimensions and PZT-layer thicknesses (tPZT) , the PZT-on-silicon resonator has higher resonant frequency (fC) , higher Q (5100 versus 140), lower RX (51 Ω versus 205 Ω ), and better linearity [third-order input intercept point (IIP3) of +43.7 dBm versus +23.3 dBm ]. In contrast, the PZT-only resonator demonstrated much wider frequency tuning range (5.1% versus 0.2%).

7 August 2017 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
LWLei Wan
Lei Wan
HCHengky Chandrahalim
Hengky Chandrahalim
CCCong Chen
Cong Chen
QCQiushu Chen
Qiushu Chen
TMTing Mei
Ting Mei
XFXudong Fan
Xudong Fan
We developed a chip-scale temperature sensor with a high sensitivity of 228.6 pm/°C based on a rhodamine 6G (R6G)-doped SU-8 whispering gallery mode microring laser. The optical mode was largely distributed in a polymer core layer with a 30 μm height that provided detection sensitivity, and the chemically robust fused-silica microring resonator host platform guaranteed its versatility for investigating different functional polymer materials with different refractive indices. As a proof of concept, a dye-doped hyperbranched polymer (TZ-001) microring laser-based temperature sensor was simultaneously developed on the same host wafer and characterized using a free-space optics measurement setup. Compared to TZ-001, the SU-8 polymer microring laser had a lower lasing threshold and a better photostability. The R6G-doped SU-8 polymer microring laser demonstrated greater adaptability as a high-performance temperature-sensing element. In addition to the sensitivity, the temperature resolutions for the laser-based sensors were also estimated to be 0.13 °C and 0.35 °C, respectively. The rapid and simple implementation of micrometer-sized temperature sensors that operate in the range of 31 – 43 °C enables their potential application in thermometry.

1 January 2013 in Sensors and Actuators A: Physical
Verified
Journal Article
Closed access
Clementine M BoutryClementine M Boutry
Clementine M Boutry
HCHengky Chandrahalim
Hengky Chandrahalim
PSPatrick Streit
Patrick Streit
MSMichael Schinhammer
Michael Schinhammer
AHAnja C. Hänzi
Anja C. Hänzi
CHChristofer Hierold
Christofer Hierold

13 April 2015 in Lab on a Chip
Verified
Journal Article
Closed access
PDF file
HCHengky Chandrahalim
Hengky Chandrahalim
QCQiushu Chen
Qiushu Chen
ASAli A. Said
Ali A. Said
MDMark Dugan
Mark Dugan
XFXudong Fan
Xudong Fan
We designed, fabricated, and characterized a monolithically integrated optofluidic ring resonator laser that is mechanically, thermally, and chemically robust. The entire device, including the ring resonator channel and sample delivery microfluidics, was created in a block of fused-silica glass using a 3-dimensional femtosecond laser writing process. The gain medium, composed of Rhodamine 6G (R6G) dissolved in quinoline, was flowed through the ring resonator. Lasing was achieved at a pump threshold of approximately 15 μJ mm−2. Detailed analysis shows that the Q-factor of the optofluidic ring resonator is 3.3 × 104, which is limited by both solvent absorption and scattering loss. In particular, a Q-factor resulting from the scattering loss can be as high as 4.2 × 104, suggesting the feasibility of using a femtosecond laser to create high quality optical cavities.

17 December 2015 in Scientific Reports
Verified
Journal Article
Open access
HCHengky Chandrahalim
Hengky Chandrahalim
XFXudong Fan
Xudong Fan
This paper presents wavelength configurable on-chip solid-state ring lasers fabricated by a single-mask standard lithography. The single- and coupled-ring resonator hosts were fabricated on a fused-silica wafer and filled with 3,3′-Diethyloxacarbocyanine iodide (CY3), Rhodamine 6G (R6G) and 3,3′-Diethylthiadicarbocyanine iodide (CY5)-doped polymer as the reconfigurable gain media. The recorded lasing threshold was ~220 nJ/mm2 per pulse for the single-ring resonator laser with R6G, marking the lowest threshold shown by solid-state dye-doped polymer lasers fabricated with a standard lithography process on a chip. A single-mode lasing from a coupled-ring resonator system with the lasing threshold of ~360 nJ/mm2 per pulse was also demonstrated through the Vernier effect. The renewability of the dye-doped polymer was examined by removing and redepositing the dye-doped polymer on the same resonator hosts for multiple cycles. We recorded consistent emissions from the devices for all trials, suggesting the feasibility of employing this technology for numerous photonic and biochemical sensing applications that entail for sustainable, reconfigurable and low lasing threshold coherent light sources on a chip.