1 May 2021 in Materials Science and Engineering: A
7 December 2017 in Computational Mechanics
1 January 2018 in Shock and Vibration
The evaluation of the response function of the structural pounding problem is generally time‐consuming if high‐order systems are applied. The well‐known modal truncation strategy is outstandingly efficient for a single linear ground‐accelerated structure. However, for the analysis of the structural pounding problem, the classical modal truncation technique turns out to be ineffective as additional higher frequency motion due to possible contact impact occurs. This makes the determination of how many modes should be taken into account in order to obtain a required level of accuracy more difficult. Therefore, in this paper, a systematically controlled modal truncation strategy adapted to the seismic pounding formulation under consideration of high nonlinearity and nonsmoothness of contact problems is introduced. A comparative study of the classical and the controlled modal truncation technique is presented and a comparison with the commercial software package ABAQUS© is provided. It is shown that the computational accuracy is significantly improved when applying the new systematically controlled modal truncation strategy.
5 August 2022 in Journal of the Mechanics and Physics of Solids
18 January 2024 in Biomechanics and Modeling in Mechanobiology
14 December 2021 in Proceedings in Applied Mathematics and Mechanics
Recently, designing light‐weight BMGs with high‐strength has attracted much attention. Additive manufacturing (3D‐printing) using selective laser melting (SLM) enables the production of porous bulk metallic glasses (BMGs), which is difficult to achieve by applying traditional manufacturing techniques. In this study, different porous structural prototypes of 3D‐printed Zr‐based BMGs are comparatively studied. Main focus is put on the strength optimization by varying pore arrangement and pore morphology. A constitutive model based on Mohr‐Coulomb theory with multi‐slips system is applied to describe the shear banding behaviors of 3D‐printed amorphous BMGs.