Acoustic cavitation has been the subject of research and discussion for many years and it is the underlying driving force for sonochemistry. The collapse of acoustic cavitation bubbles in water near to a surface can bring about significant surface modification in terms of the mechanical damage caused by the asymmetric collapse of the bubbles which cause erosion and abrasion. A second effect of acoustic cavitation is the formation of short lived radicals caused by the breakdown of water inside the bubble. For the first time the dependence of these effects has been observed on the surface of a plastic material as a function of ultrasonic frequency.
1 October 1991 in Journal of Applied Electrochemistry
The possibility of protein release from polymeric microcapsules by means of low-power (up to a maximum of 3.2 W) high-frequency (850 kHz) ultrasound was studied. The release efficiency using these ultrasonic parameters that are close to those currently used in medical diagnostic and ultrasound treatment was compared to that achieved with a conventional 20 kHz 70 W ultrasonic probe. Microcapsules were made by polyelectrolyte multilayer assembly on 3–5 µm calcium carbonate particles with co-precipitated fluorescently labelled protein. Ultrasound induced protein release was monitored by supernatant fluorescence increase after sonication. The release efficiency is improved by the presence of gold nanoparticles in the microcapsule shell. The amount of gold nanoparticles in the shell was found to play an important role in release efficiency. The irradiation was carried out at several intensities and exposure times and evidence of microcapsule rupture after treatment was obtained by confocal and scanning electron microscopy.
1 November 1992 in Journal of Electroanalytical Chemistry
In the present study, a model of closed-loop recycling of copper from PCBs is demonstrated, which involves the sequential application of bioleaching and electrowinning to selectively extract copper. This approach is proposed as part of the solution to resolve the challenging ever-increasing accumulation of electronic waste, e-waste, in the environment. This work is targeting copper, the most abundant metal in e-waste that represents up to 20% by weight of printed circuit boards (PCBs). In the first stage, bioleaching was tested for different pulp densities (0.25–1.00% w/v) and successfully used to extract multiple metals from PCBs using the acidophilic bacterium, Acidithiobacillus ferrooxidans. In the second stage, the method focused on the recovery of copper from the bioleachate by electrowinning. Metallic copper foils were formed, and the results demonstrated that 75.8% of copper available in PCBs had been recovered as a high quality copper foil, with 99 + % purity, as determined by energy dispersive X-ray analysis and Inductively-Coupled Plasma Optical Emission Spectrometry. This model of copper extraction, combining bioleaching and electrowinning, demonstrates a closed-loop method of recycling that illustrates the application of bioleaching in the circular economy. The copper foils have the potential to be reused, to form new, high value copper clad laminate for the production of complex printed circuit boards for the electronics manufacturing industry. Graphic Abstract
This paper describes a two-step method to prepare novel copper-methanol nanofluids capped with a short chain molecule, (3-Aminopropyl)trimethoxysilane (APTMS). Two commercial nanopowders were dispersed at various powers using a 20 kHz ultrasonic probe into solutions of methanol and the capping agent. Ultrasonic energy input was measured by calorimetry with z-average diameters, intensity and number size distributions recorded by a dynamic light scattering technique. The stability of the dispersion was monitored visually, and quantified by recording the zeta potential. Dispersions of the bare powder were used as a control. Absorption spectroscopy was used to confirm the presence of the capping agent. The thermal conductivities of 0 to 10% wt./vol. (1.1% vol.) dispersions of the capped copper-methanol nanofluid were determined using a C-Therm analyzer. Optimum ultrasonic de-agglomeration conditions gave dispersions with a z-average particle size of <200 nm and a PdI of <0.2. The capped particles showed good stability; up to six months in some instances, and an average zeta potential of +38 mV was recorded. The thermal conductivity of the nanofluid increased with concentration, and an enhancement of 9% over the base fluid was found at 10% wt./vol. (1.1% vol.). This innovative work has demonstrated the ultrasonic preparation and stability of copper nanoparticles protected with APTMS; a short chain molecule which binds to copper and prevents oxidation. The protected particles can enhance the thermal conductivity of methanol with no interference from the capping ligand.