Shuyan Yang

Shuyan Yang

Auto-generated profile, based on publicly available information

Shuyan Yang

School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266033, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2018 in Coatings
Verified
Journal Article
Open access
PDF file
LCLei Cao
Lei Cao
YWY. Wan
Y. Wan
SYShuyan Yang
Shuyan Yang
JPJibin Pu
Jibin Pu
Thermal oxidation of Ti6Al4V was carried out at 700 °C for 5 h in air atmosphere. The characteristics of morphology and structure, micro-hardness, and tribocorrosion behavior in 0.9 wt.% NaCl solution of thermally oxidized Ti6Al4V alloys were investigated and compared with those of the untreated one. The scanning electron microscope (SEM) and glow discharge spectrometer (GDS) results reveal that the oxide layer is completely coated on the substrate, which is a bilayer structure consisted of oxide film and oxygen diffusion zone (ODZ). X-ray diffraction (XRD) and Raman measurements reveal the rutile phase as the dominant phase. The micro-hardness and surface roughness (Ra) increase about 1.63 and 4 times than those of the untreated one. Thermally oxidized sample obtains corrosion and tribocorrosion resistance property in 0.9 wt.% NaCl solution. The corrosion potential has a more than 500 mV anodic shift, the corrosion current density decreases about 80%. The total material loss volume is reduced by almost an order of magnitude under tribocorrosion behavior, which is due to the improvement of the micro-hardness of the oxide layer and ODZ that reduce the corrosion and the synergistic effect of corrosion and wear.

17 August 2018 in Industrial Lubrication and Tribology
Verified
Journal Article
Closed access
HZHongjin Zhao
Hongjin Zhao
LCLei Cao
Lei Cao
YWY. Wan
Y. Wan
SYShuyan Yang
Shuyan Yang
JGJianguo Gao
Jianguo Gao
JPJibin Pu
Jibin Pu
Purpose: The purpose of this paper is to increase wear resistance of aluminum. Design/methodology/approach: The authors have studied the ways to improve the tribological performance of aluminum by assembling stearic acid on aluminum coated by sol-gel-derived TiO2 film. The samples were characterized by infrared spectroscopy, contact angle measurements and a macro friction and wear tester. Findings: Enhanced wear resistance was clearly obtained after functionalization of TiO2 film on aluminum by stearic acid. Originality/value: The relevant results might be helpful for guiding the surface modification of aluminum devices in industrial applications.