28 August 2025 in IEEE Access
Since Starlink’s introduction, global social and technical demands for satellite-based telecommunication systems have rapidly increased. In South Korea as well, research on communication satellites began several years ago. To realize satellite communication, both long-distance communication with ground station terminals and inter-satellite communication are essential. The digital transceiver unit (DTU), which provides beam-steering functionality to control signal directionality and concentrate emissions along specific trajectories, is one of the most critical payloads in satellite systems. This paper conducts a comprehensive structural analysis of the DTU to evaluate its stability under launch conditions. First, modal analysis was performed to verify compliance with stiffness requirements and ensure sufficient separation between the DTU’s vibrational modes and those of the satellite. Quasi-static analysis then assessed structural stability under static acceleration corresponding to design loads. Finally, random vibration and shock analyses were conducted to evaluate the reliability of EEE (electrical, electronic, and electromechanical) components on the PCB and fastener integrity. The analysis configuration modeled the DTU as integrated into the satellite system. Since environmental testing for the structural-thermal model of the satellite system remains ongoing, vibration/shock inputs followed ESA standards. Results demonstrate that the proposed DTU design meets all structural stability requirements for launch environments.
12 September 2025 in IEEE Access
Low Earth Orbit(LEO) communication satellites have emerged as a key technology driving the evolution of global communications technology, owing to their capacity for high data transmission rates and extensive coverage area. In the field of communication satellites, there is an increasing demand for enhancement in payloads, with the objective of performing real-time data processing capabilities. This necessity has given rise to the densification of the high heat generating Electrical, Electronic and Electromechanical(EEE) parts. This causes the junction temperature of the EEE parts to rise, which has devastating effects on the performance, lifetime, and reliability of the payloads. Ultimately, the entire satellite system can lead to mission failure, so thermal design with prior thermal analysis and testing is required. In this study, a steady-state thermal analysis of the digital transceiving unit(DTU) of a payload for a LEO communication satellite was performed in the on-orbit environment. DTU is highly integrated with high-performance EEE parts due to its mission to relay communication signals on communication satellites. During the mission, the temperature distribution of the EEE parts under the worst cold and hot conditions was verified to ensure that the temperature requirements of the DTU were met. Furthermore, derating analysis of temperature was conducted to assess the thermal stability and reliability of EEE parts.