5 June 2026 in IEEE Transactions on Instrumentation and Measurement
The rise of miniaturized wearable devices has imposed more stringent requirements on the sensitivity of satellite signal reception. However, the low-cost oscillators commonly used in wearable devices exhibit considerable frequency instability, which degrades both receiver sensitivity and tracking accuracy. To address this issue, this paper establishes a tracking jitter model that jointly accounts for thermal noise and oscillator noise, and derives an explicit expression for tracking jitter as a function of the coherent integration time. Based on the U-shaped characteristic of the resulting tracking jitter curve, an optimal coherent integration time model is further derived. In addition, the time-varying behaviors of tracking jitter contributed by different oscillator noise components are investigated, thereby characterizing the dominant role of flicker frequency noise. Both simulation and experimental results show that, for most integration intervals, flicker frequency noise is the primary source of oscillator-induced tracking jitter. Compared with several conventional coherent integration time settings, the proposed optimal coherent integration time model improves tracking accuracy by 3% to 49% and enhances sensitivity by 0.5 to 1 dB. In comparison with the Kalman filter-based optimal coherent integration method, the proposed approach achieves comparable sensitivity while preserving the low-complexity advantage of the conventional PLL, and further improves steady-state tracking accuracy by approximately 2% to 4%. These results provide a theoretical basis for oscillator selection and parameter configuration in satellite signal receiving terminals.