Yan Wang

Yan Wang

Auto-generated profile, based on publicly available information

Yan Wang

Tsinghua University

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 October 2016 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
XZXintian Zhou
Xintian Zhou
HSHongyuan Su
Hongyuan Su
YWYan Wang
Yan Wang
RYRuifeng Yue
Ruifeng Yue
GDGang Dai
Gang Dai
JLJuntao Li
Juntao Li
The long-term operational reliability of silicon carbide (SiC) MOSFETs needs to be further verified before they could replace silicon counterparts in power applications. In this paper, the failure mechanism of commercial 1.2-kV SiC MOFSETs under repetitive short-circuit (SC) tests has been investigated. Relatively low stress defined as low bias voltage and short SC duration is imposed on the devices, eliminating the effect of gate oxide degradation and metal deterioration. The generation of hot holes in the oxide is confirmed by the charge pumping experiments and measurements on the transfer characteristics of the stressed devices during the tests. Electrothermal simulation results demonstrate that the trapped holes are located above the channel region due to the high local impact ionization generation rate and electric field. Besides, the additional positive electric field to the channel makes Vth decrease and Idss increase, which are consistent with the experimental results. What is more, the trapped holes get indeed released, as the ambient temperature increases when the stress is removed.

30 August 2013 in Physical Chemistry Chemical Physics
Verified
Journal Article
Closed access
PDF file
XJXiang Ji
Xiang Ji
JZJinyu Zhang
Jinyu Zhang
YWYan Wang
Yan Wang
HQHe Qian
He Qian
ZYZhiping Yu
Zhiping Yu
The contact resistance (Rc) between graphene and metal electrodes is of crucial importance for achieving potentially high performances for graphene devices. However, previous analytical models based on Landauer's approach have failed to include the Fermi velocity difference between the graphene under the metal and the pure graphene channel. Hereby we report a theoretical model to estimate the Rc using density-functional theory and non-equilibrium Green's function methods. Our model not only presents a clear physical picture of the metal–graphene contacts, but also generates Rc values which are in good agreement with the experimental results: 210 Ω μm for double-sided Pd contacts compared with 403 Ω μm for single-sided Pd contact.

21 July 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
XZXintian Zhou
Xintian Zhou
HSHongyuan Su
Hongyuan Su
RYRuifeng Yue
Ruifeng Yue
GDGang Dai
Gang Dai
JLJuntao Li
Juntao Li
ZYZhiping Yu
Zhiping Yu
In this paper, the long-term reliability of commercial 1.2-kV 4H-SiC MOFSETs under repetitive unclamped inductive switching stresses is evaluated experimentally. The degradation of device characteristics, including the threshold voltage Vth, drain leakage current Idss, and on-state resistance Ron, is observed after 80k avalanche cycles. The regular charge pumping (CP) measurements reveal that the failure mechanism characterized by the hot holes injection and trapping into the gate oxide above the channel and JFET region may occur during the aging experiments, which is further ascertained by the succeeding electrothermal simulations and should be responsible for the degradation of Vth and Idss. After decapping the failed devices, the bond wires lift off due to thermal fatigue is discovered and regarded as the main reason for the degradation of Ron. The poststress high-temperature treatment is also carried out as an approach to indirectly corroborate the aforementioned failure mechanisms. Moreover, the impact of different test conditions on the degradation rate of electrical characteristics is discussed to thereby find ways to relieve these degeneration phenomena.

22 April 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
WZWei Zhu
Wei Zhu
JWJiawen Wang
Jiawen Wang
XZXiaohan Zhang
Xiaohan Zhang
WLWei Lv
Wei Lv
BLBingbing Liao
Bingbing Liao
YWYan Wang
Yan Wang
This article presents a power efficient 24-28-GHz four-element phased-array transceiver (TRX) front end (FE) for 5-G base stations and user equipment communications. A power efficient hybrid quadrature vector interpolation-based phase-shifting architecture is proposed to increase the TX and RX power efficiency and phase resolution. A transformer-based embedded T/R switch is proposed which minimizes TX and RX losses to ensure high TX output power and power efficiency while maintaining a low noise figure (NF) and extremely compact chip area. The 24-28-GHz four-element TRX FE is implemented in a 65-nm CMOS process (1P9M) for large-scale phased-array applications. The TX and RX paths achieve 0.8° phase resolution with <; 0.47°/0.17-dB RMS phase/gain error as well as 24-dB gain control range with 0.75-dB gain step and <; 0.1°/0.4-dB RMS gain/phase error over 24-30 GHz. The full TX path (including splitter and T/R switch) also achieves a measured 16.6-/18.9-dBm OP1dB/ P sat with 21.1%/16.6% PAE peak /OP1dB for each FE element while maintaining a minimum 4.4-dB NF in the full RX path (including combiner, T/R switch, and OFF-mode PA) at 28 GHz. Under the 64-/256-QAM modulation measurements, the full TX path achieves a state-of-the-art average output power of 13.5-/10.2-dBm per element (8.4%/3.5% full TX path PAE) with -26.4/-30.8 dB EVM and 27.8-/30.1-dB ACLR at 28 GHz, making the proposed TRX FE can be effectively deployed in both base stations and user equipment for 5-G communications. The chip size of the four-element TRX FE excluding I/O pads is only 3.4×1.1 mm 2 .

20 October 2017 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
XZXintian Zhou
Xintian Zhou
RYRuifeng Yue
Ruifeng Yue
JZJian Zhang
Jian Zhang
GDGang Dai
Gang Dai
JLJuntao Li
Juntao Li
YWYan Wang
Yan Wang
A novel silicon carbide (SiC) trench MOSFET with floating/grounded junction barrier-controlled gate structure (FJB-MOS/GJB-MOS) is presented and investigated utilizing Sentaurus TCAD simulations. The split P+ region introduced beneath the trench could better shield the gate oxide from the high electric field in the blocking mode, leading to an enhancement in the breakdown voltage while without significant degradation of other characteristics. As a result, the FJB-MOS with floating P+ shielding exhibits a higher figure of merit related to the breakdown voltage and the specific on-resistance ( ${V}_{\textsf {BR}}^{{\,\textsf {2}}}/{R}_{ \mathrm{\scriptscriptstyle ON},\textsf {sp}}$ ), which is improved by 15% and 49%, respectively, with comparison to those of the state-of-the-art double-trench MOSFET and L-shaped gate trench MOSFET. In terms of the GJB-MOS with grounded P+ shielding, it shows great advantage in reducing the switching losses thanks to the lower specific gate–drain charge ${Q}_{{\:\textsf {gd,sp}}}$ and is more conductive to high frequency applications. Additionally, the formation of the P+ region is aided by the Sentaurus Process and the processing implementation of the proposed structure is discussed.

16 July 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
TYTongtong Yang
Tongtong Yang
YWYan Wang
Yan Wang
RYRuifeng Yue
Ruifeng Yue
In this article, a novel SiC trench MOSFET with deep p⁺ shielded regions and current spreading layers (CSLs) (DPCSL-MOS) is proposed and studied by TCAD simulations. The results show that the introduction of the deep p⁺ shielded region reduces the transfer capacitance Crss (=Cgd) and the saturation current, thus reducing the total switching losses and increasing the short-circuit capability. Besides, the deep p⁺ regions around the source trench efficiently shields the shallow gate trench from the drain voltage, thus reducing the maximum oxide electric field. In addition, the introduction of CSL with higher doping concentration than the drift layer brings down the JFET effect and the resultant device on-resistance. The dynamic figure of merit (FOM) (Ron * Qgd) is significantly improved with no degradation in terms of the static FOM (Vbr²/Ron). Therefore, the proposed DPCSL-MOS is a more robust and promising structure for power electronic systems, especially for the high-frequency applications.