In this paper, the design of an MIMO antenna system for WIFI gateway application is proposed. 8 printed monopole dual band antennas are placed on a 135×135mm 2 FR-4 PCB. Placement of the elements is optimized to limit coupling effect. The objective of the system is to combine the MIMO technique and antenna diversity to increase data rate performance. S-Parameters and radiation performances are presented. A new measurement method based on EVM and BER criteria is proposed to characterize the antenna system in a realistic environment.
This paper presents the first results in the development of a dual frequency Fresnel reflector which could be used as ground terminal for wideband telecommunication satellite systems operating at Ka-band.
In a first part of this article, we present the method based on the reflection phase diagram for the identification of the EBG (electromagnetic band gap) structures. The procedure consists to plot the diagram of phase of the wave reflected by EBG structure excited by an incident wave, in the simplest case, plane and normal upon the structure. The forbidden band corresponds to the frequency band where the phase of the reflected wave is equal to 0plusmn45deg, criterion of Sievenpiper, or to 90plusmn45deg, criterion of Rahmat-Samii. In the filtered frequency band, the structure behaves as a magnetic conductor : a High-impedance surface. The EBG structure studied and designed is a Mushroom-like (D. Sievenpiper et al., 1999). The performances of this structure are modelled using the HFSS code. In the second part, we illustrate the application aimed by the design of this structure.
This paper study the performance of a compact measurement solution to calibrate and assess over-the-air (OTA) performance of FR2 active antenna array. Radiation pattern can automatically measured for multiple beamforming configurations in Tx and Rx mode. The open configuration make the debug and testing easier in the early stage of the project. A 4*2 beamforming array at 26GHz is measured in order to assess the performance of the amplitude and phase control.
22 April 2025 in IEEE Antennas and Propagation Magazine
This article presents the “Institut Supérieur de l’Aéronautique et de l’Espace” (ISAE) workshop. It is a benchmarking workshop dedicated to radar cross-section (RCS), antennas, and electromagnetic compatibility (EMC) problems. It has existed for 30 years with a biennial frequency. It is open to anyone bringing some inputs to the community of participants. The article outlines its organization and main features.
In this paper, an antenna system based on a Luneburg lens associated to a conformal array is proposed for multiple beams applications in which the angular coverage sector is ensured by a grid of beams. A preliminary design is presented to evaluate the performance of such system, then the final design considering the manufacturing process by 3D printing is presented. The antenna prototype will be manufactured and tested.