10 April 2018 in Measurement Science and Technology
The appearance of repetitive transients in a vibration signal is one typical feature of faulty rolling element bearings. However, accurate extraction of these fault-related characteristic components has always been a challenging task, especially when there is interference from large amplitude impulsive noises. A frequency domain multipoint kurtosis (FDMK)-based fault diagnosis method is proposed in this paper. The multipoint kurtosis is redefined in the frequency domain and the computational accuracy is improved. An envelope autocorrelation function is also presented to estimate the fault characteristic frequency, which is used to set the frequency hunting zone of the FDMK. Then, the FDMK, instead of kurtosis, is utilized to generate a fast kurtogram and only the optimal band with maximum FDMK value is selected for envelope analysis. Negative interference from both large amplitude impulsive noise and shaft rotational speed related harmonic components are therefore greatly reduced. The analysis results of simulation and experimental data verify the capability and feasibility of this FDMK-based method
9 January 2025 in Measurement Science and Technology
There are two challenges in the bearing fault feature extraction approach based on optimal frequency band (OFB) selection. The first is to design a high-precision signal decomposition algorithm to ensure that no fault information is lost; The second is to construct an indicator that is sensitive to the statistical characteristics of fault information. This paper proposed a novel OFB selection approach to solve the above challenges. Firstly, a parameter selection strategy is introduced for fixed bandwidth overlap-and-slip filter banks (FBOSFB). Adopting this strategy, the FBOSFB can decompose the signal into several narrowband signals while ensuring that no fault information is lost. Secondly, a novel indicator, namely periodic shock indicator (PSI), is constructed. The PSI has the capability to simultaneously assess both the periodic and shock characteristics of the bearing fault feature signal. Thirdly, the narrowband signals obtained from the first step are used as input to the OFB search algorithm, and then the OFB is determined by maximizing the PSI. Finally, three real bearing fault data are employed to verify the fault feature extraction performance of the proposed approach, the results show that the proposed approach can effectively extract the bearing fault feature.
11 August 2014 in Applied Mechanics and Materials
Water jet propulsion (WJP) with positive displacement pump (PD pump), in which the suction thrust of PD pump (Due to the effect of pump suction and the influence of the suction boundary layer) and the reaction thrust of water jet are used to push watercraft forward, has many advantages like high efficiency,low noise, high maneuverability, good adaptability to variable working conditions, simple transmission mechanism over traditional propulsion methods. A mathematical model is developed and the WJP theory with PD pump is analyzed. Numerical studies are carried out to study the suction thrust, reaction thrust, and propulsion efficiency of the thruster with Bernoullihyperbolic suction inlet-PD pump-Bernoulli hyperbolic nozzle. The results show that: 1) in the conditions of no cavitation in suction inlet and constant flow rate, the suction thrust is inversely proportional to the inlet diameter and reaches around 8.5% of the total thrust; 2) the reaction thrust increases with the decrease of the nozzle diameter; 3) the pump-suction coefficient v is proportional to the speed ratio μ; 4) the efficiency of WJP with PD pump is higher than with negative displacement pump under the same speed ratio. The related conclusions provide a basis for the design of high performance water propulsion unit.
9 June 2025 in Engineering Applications of Artificial Intelligence